Troubleshooting Powered Lift Not Working on Fan-Tastic Vent

Question

Question:

Good afternoon, I received and installed the powered lift but it is still not lifting when the switch is turned on. Could it be the switch and if so, do you sell those and is it easily replaceable? Thanks

asked by: Bob I

0

Expert Reply:

Since everything works aside from the power lift, and the motor didn't fix the problem, I would say it is a bad control board. You could certainly test the switch for power if you want, but it isn't available as a separate replacement. The board isn't available on its own either so you will need the # FV807359.

This replaces the internal components of your vent which will end the need to troubleshoot further. It does cost a bit more than an individual replacement part, but it also beats having to replace the entire vent.

expert reply by: Robin H

0

Answer 1

If you have the clamp-on style, you need the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit #FV807357. If you have the high or low style base you want the #FV807359. The upgrade kit includes the control board and is the only way to replace it since…

view full answer...

Answer 2

I spoke with Dometic and they reccommend that you triple check that you have followed the instrucitons exactly they way they are as there is a jumper cable that is meant to be installed if you have the pancake style motor, and if left out you will…

view full answer...

Answer 3

The number ( 411 D) you provided doesn't correspond with a Fan-Tastic Vent roof vent model number, but if yours uses the remote control #FV9068-09 that you referenced, that tells us it's a 7350 Series Fan-Tastic Vent Roof Vent, like…

view full answer...

Answer 4

The Replacement Manual Lift Control Knob part #FVK1140-09 is actually the redesigned version of the flower shaped knob that you have now. The flower shaped version you have is no longer available but the above will work unless you need to still be…

view full answer...

Answer 5

That does not sound fun to deal with, I have a solution for you though. It sounds like either the remote needs to be reset or you do not have proper voltage going to the unit. To reprogram the remote hold it at least 12 inches or closer to the…

view full answer...

Answer 6

The only circuit boards we carry for FanTastic vents are on the Upgrade Kits #FV807359 and #FV807357. We do not carry the circuit board as a separate item at this time.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Troubleshooting Powered Lift Not Working on Fan-Tastic Vent

Featured Help Information

Miscellaneous Media

Continue Researching