Broken Inside Locking Mechanism On A Yakima Skybox 16

Question

Question:

I am replacing the locking handles on my skybox 16 but when I took the broken handle off the inside mechanism looks broken. Do you have a replacement for the inside mechanism that I can buy?

asked by: Sue K

0

Expert Reply:

Hello Sue. We do have the Replacement Locking Handles # Y8880348 but unfortunately we do not carry a replacement for the inside part of the lock mechanism. It may be worth contacting Yakima directly to see if they can provide something, or perhaps replace under warranty.

expert reply by: Jesse M

0

Answer 1

Hey Filipe, so I attached the install instructions for the part #Y8880348 for you to check out. If you can unbolt/unscrew the broken lock core that would be what you'd need to do if you can't get the key out. You might have to have the key…

view full answer...

Answer 2

It is very difficult to diagnose what the issue may be without knowing a model number and seeing photos but it sounds like the latch on the locking mechanism on your RocketBox may have somehow been damaged. I would need to know the model number in…

view full answer...

Answer 3

I checked with Yakima and for your Skybox 16 the correct lid support for the rear is supposed to be part #8870072 and for the front is part #8870090. The picture you submitted shows a broken or twisted part #8870090 so that is what you'd need as…

view full answer...

Answer 4

Since you have the Yakima SkyBox 16 Roof Cargo Box #Y07335, you can use the Replacement Lid Support for Yakima Cargo Boxes #8880683 for a replacement rear hinge. You can use two of the Replacement Lid Support for Yakima Cargo Boxes #8880683 to…

view full answer...

Answer 5

The Replacement Rear Lid Support for Yakima SkyBox 12 and SkyBox 16 Rooftop Cargo Boxes 2009 and Newer 8870088 was originally attached with the rivets you have attached a picture of. The new support comes with screws that are used instead. You can…

view full answer...

Answer 6

I attached a picture that shows instructions for replacing the handle of your Skybox 16 part #Y07336 with the part #Y8880348 that you referenced. This handle hasn't changed since 2014. Depending on which Skybox you have and what year it was…

view full answer...

Answer 7

The correct replacement handles for a Yakima SkyBox made from 2009 on is the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes #Y8880348. These come in a quantity of two with lock cores and keys, so you have the right…

view full answer...

Answer 8

It sounds like your Skybox has already been tampered with as this is not normal at all. I recommend you replace the entire assembly using the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes - Qty 2 #Y8880348. These…

view full answer...

Answer 9

I reached out to my contact at Yakima and we are a little confused on what you are referring to. If it is part of the lock itself on your Yakima SkyBox 16 Rooftop Cargo Box - 16 cu ft - Black Carbonite, #Y07335, you will want to replace the lock with…

view full answer...

Answer 10

Yes, the Replacement SuperLatch Handle Assemblies part #Y8880348 will be a direct replacement for your Yakima SkyBox 16s Rooftop Cargo Box 8007178. It is the exact same assembly that you have attached a photo of. I have attached a list of other…

view full answer...

Answer 11

If you have a newer Yakima SkyBox NX 16 like part #Y95AV then you should be able to just open the box from the other side. That said, there really isn't a good way to go about opening this without the latch installed. If you like you can try to…

view full answer...

Answer 12

For a replacement handle for your Skybox 16 part #Y07336 you would want the part #Y8880348. This comes with two handles so that you can replace both and have matching lock cores. You would have no problem installing the handle yourself. I attached a…

view full answer...

Broken Inside Locking Mechanism On A Yakima Skybox 16

Product Page this Question was Asked From

Continue Researching