Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes - Qty 2

Ask the Experts about this Yakima Accessories and Parts
Do you have a question about this Accessories and Part?

• Instructions for Replacing Handle on a Yakima Skybox 16
  
• I attached a picture that shows instructions for replacing the handle of your Skybox 16 part # Y07336 with the part # Y8880348 that you referenced. This handle hasn't changed since 2014. Depending on which Skybox you have and what year it was purchased this could be an updated version.
  view full answer...


• Replacement For Piece Of Locking Mechanism On Yakima Skybox 16
  
• I reached out to my contact at Yakima and we are a little confused on what you are referring to. If it is part of the lock itself on your Yakima SkyBox 16 Rooftop Cargo Box - 16 cu ft - Black Carbonite, # Y07335, you will want to replace the lock with Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes - Qty 2, # Y8880348. If you are looking at the pieces that hold the large hinge pin in place, I confirmed with Yakima they do not offer a replacement for that...
  view full answer...


• Replacement Lid Supports for the Yakima Skybox 21
  
• The Yakima Skybox 21 part # Y07337 made from 2014 to present has a much more aerodynamic shaped lid than the Yakima Skybox 21 part Y07184 made from 2009 to 2014 had. I have attached a photo of each so you can see the difference. If you have the 09-14 box then you will want to use part # 8880684 for the front lid support and part # 8880683 for the rear lid support. If you have the 14+ box then you will want to use part # 8880683 for the rear lid support. In order to replacing the locking...
  view full answer...


• Replacement Handle for Yakima Skybox 16 Cargo Box and Install Instructions
  
• For a replacement handle for your Skybox 16 part # Y07336 you would want the part # Y8880348. This comes with two handles so that you can replace both and have matching lock cores. You would have no problem installing the handle yourself. I attached a picture that I took from the install instructions that will walk you through the entire process.
  view full answer...


• Troubleshooting Yakima Lock Core that Won't Accept Key
  
• If the lock core is not accepting the key the problem lies with it and not the latch like part # Y8880348. If you can get the flap of the core to slide up you would want to use a spray lubricant like WD-40 and use the straw of it to direct the lubricant into the lock core. Let the core sit for a few minutes and try again. After doing this a couple time it should free up the lock core and allow the key to slide in. If it still doesn't want to turn you would want to insert the key several...
  view full answer...


• How To Repair Yakima SkyBox Rooftop Cargo Box With Key Broken Off In Lock
  
• I spoke with my Yakima representative, who tells me that your best bet would be to get the remaining piece of the key out of the lock if at all possible. To do this, you'll need some spray lubricant like PB blaster or WD-40 and a small tool like a dental pick and some fine needle nose pliers. First, thoroughly saturate the lock with the spray. Then use the dental pick to work around the serrated edge of the key, pulling gently outward. Once you get enough of the key extricated, you can...
  view full answer...


• Replacing Yakima Skybox 16 Carbonite Latches and Locks
  
• It sounds like your Skybox has already been tampered with as this is not normal at all. I recommend you replace the entire assembly using the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes - Qty 2 # Y8880348. These latches come with the SKS lock cores and 2 keys as well as the latch. This will actually be less expensive than just replacing the Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202.
  view full answer...


• Availability of Replacement Yakima Skybox 16 Handle Assembly
  
• I spoke with my contact at Yakima and he confirmed that the replacement SuperLatch Handle Assembly for Yakima SkyBox, part # Y8880348, which you referenced, is the part you will need for your Yakima Skybox 16 as long as the Skybox model is 2010 to present. The lock core and key is not included, so you'll need part # Y07202. If your SkyBox 16 is older, I can try to find a replacement if you can send me the actual part number of the box you have.
  view full answer...


• Replacement Handle for Yakima Skybox 21 Made Before 2011
  
• You do in fact need part # Y8880348. This includes a new set of 2 handles and 2 lock cores with keys for your Yakima Skybox 21. If you're needing other replacement parts, they are: - Mounting Hardware, part # Y90135 - Cargo Box Cam Hardware, part # 8870071 - Seal Strip, part # 8870086 - Barrel Nut, part # Y8870083
  view full answer...


• Replacement Locking Handle Latch For Yakima Skybox
  
• I reached out to my contact at Yakima and they were able to cross-reference the serial number. The Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes - Qty 2 # Y8880348, will be the correct replacement for your Skybox. You have one of the first production runs with that latch, so it most likely was manufactured in 2009.
  view full answer...


• Yakima Skybox Lock Housing Replacement Recommendation
  
• Does the latch look like part # Y8880348? This the confirmed replacement latch for the Yakima Skyboxes but without knowing which one you have for sure it's hard to say with 100 percent certainty.
  view full answer...


• Troubleshooting a Yakima Skybox with Missing Handle
  
• You should be able to open the box from the other side. Once you have the other side open you can then replace the handle you took to the locksmith. Unless the locksmith wasn't able to fix the issue. If you need replacement handles we carry them, part # Y8880348
  view full answer...


• Replacement SuperLatch, Lock and Key for a Yakima SkyBox Roof Mounted Cargo Box
  
• The Replacement SuperLatch Handle kit, part # Y8880348 will include everything you need to replace both handles and comes prepackaged with a pair of matching SKS locks and keys that you can replace the existing. In this case, I do recommend a complete replacement to ensure there wasn't any damage to the other latch that isn't entirely visible or could become a problem later on. If you just want to replace the lock without replacing the SuperLatch handles, you'll a Yakima SKS Change...
  view full answer...


• Replacement Locking Latch For Yakima Or Thule Roof Cargo Boxes
  
• The roof box latches we offer are designed for specific roof boxes. For example part # 8770013 is designed to replace the lock core housing for Yakima SpaceCase and SpaceBooster roof boxes. We also have a replacement SuperLatch assembly # Y8880348 for the Yakima Skybox cargo box. We also have a replacement lock and keys for a SportRack Explorer roof box. This is part # SR03807
  view full answer...


• Written Instructions to Go Along with Diagram Instructions for Yakima Handle Y8880348
  
• So that they don't have to translate their instructions into several languages Yakima makes all of their install instructions diagrams as the visual is a "universal" language. Let's see if I can help though. I attached the picture too that you referenced. Step 1. Unlock lid and open box Step 2. Unscrew two screws that hold assembly to box from inside Step 3. Turn key clockwise 270 degrees Step 4. Firmly twist handle assembly counter clockwise till it removes from box then throw...
  view full answer...


• Keying a Yakima SuperLatch Replacement Kit for a Skybox Cargo Carrier
  
• I have a solution for you, but unfortunately the SuperLatch kit, part # Y8880348 isn't able to have the SKS Lock specified when ordered, so you'll need to buy the cores to match your existing SKS Key individually. To do this, you'll search the site for "Y8771-XXXX" where XXXX is the code that is printed on your existing SKS Lock Cores and Key. These come as single units, so you'll need two to re-core your new SuperLatch kit. For instance, if your lock and key has the code "A135," you'll...
  view full answer...


• Recommendation For Replacement Handle Parts For Yakima SkyBox
  
• If your Yakima SkyBox was manufactured from 2009 to present then I recommend the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes, Item # Y8880348. This kit includes 2 handle assemblies and 2 Same Key System (SKS) lock cores with 2 keys. If this will not work for you then let me know and we will check on other options.
  view full answer...


• Will Replacement SuperLatch Handle Assembly Fit Older Skybox 18
  
• The Replacement SuperLatch Handle Assembly, part # Y8880348, is designed to fit Yakima Skybox cargo boxes manufactured from 2010 to present. You can use the lock core from your cargo box. Lock cores like part # Y07202 are sold in pairs and are keyed-alike. If you need a replacement key for your lock core just let me know what the key number is and we may be able to find the replacement for you.
  view full answer...


• Replacement Locking Handles for Yakima SkyBox Pro 21 Cargo Boxes
  
• There were 3 different Yakima SkyBox Pro 21 cargo boxes and all of them use Replacement SuperLatch Handle Assemblies # Y8880348 so they will work for you! They also come with matching keys.
  view full answer...


• Availability of Replacement Handle Assembly for Yakima SkyBox 12
  
• Per Yakima, the individual part you're speaking of isn't available as an individual replacement part. You'll need to replace the handle assembly. If your SkyBox 12 is of recent manufacture (from 2010 to present), a replacement handle assembly is available as part # Y8880348. The lock core is not included, so you'll need to use your existing lock core. If your SkyBox 12 is older, I can try to find a replacement if you can send me the actual part number of the box you have.
  view full answer...


• Replacement Latch and Lock Recommendation for a Yakima Skybox 16
  
• I checked with Yakima and for your Yakima Skybox 16 # Y07335 the correct replacement latch is the part # Y8880348 that you referenced.
  view full answer...


• Replacement Lock Cores and Handles for Older Yakima Skybox Roof Box
  
• The Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes - Qty 2 # Y8880348 are a fit for models 2009 to present. If you just drilled out the lock core, you can use lock kit # Y07202 to change out the cores and use the current handles. This comes with 2 lock cores and two keys as well as the control key. Yakima no longer carries the older handles for replacement.
  view full answer...


• Broken Handles on Yakima SkyBox 21 Rooftop Cargo Box
  
• I wish there was a trick to opening the Yakima SkyBox 21 Rooftop Cargo Box # Y07337 with the handles broken off, but there is nothing that is feasible; you can try using a Channel Lock but it doesn't seem likely you can do it without damaging the box. Your best option is to drill out the assemblies and then replace them with the Replacement SuperLatch Handle Assemblies # Y8880348.
  view full answer...

Do you have a question about this Accessories and Part?