Recommended Air Spring Kit Without Internal Jounces for a 2022 Ram 1500 Night 4X4

Question

Question:

I had an airlift system installed on my 2022 Ram Night Edition 1500 4x4. They installed it complete with compressor, wireless fob, and with the bags that have the jounces in them. The jounces are rough and hit hard on bumps in the road. I want to change the bags to non jounce. Which bags do I need?

asked by: Wade A

0

Expert Reply:

Hey Wade, for your 2022 Ram 1500 I'd recommend going with the Firestone Coil-to-Air-Spring Conversion Kit # F2595. These springs do not have the internal jounces that your current springs have, has a load leveling capacity of 3,000 lbs, and is made in the USA.

expert reply by: Bryce D

0

Wade

5/14/2024

Thanks for that, but I already have the airlift system, and just need bags that do not have jounces. Will the firestones interchange on the mounts?

Bryce D.

5/14/2024

@Wade Unfortunately, only Air Lift springs are going to work with the brackets.

Answer 1

Ram's will naturally squat a bit more because of the rear coil springs, but if you're dealing with a lot of squat then air springs would be the best option to help get you back to factory ride height. Coil air springs, like the #AL60828HD,…

view full answer...

Answer 2

I try to steer people away from the Air Lift 1000 for Coil Springs, like part #AL60828HD for your 2022 Ram 1500, just because the springs can pinch the bags where the Air Lift LoadLifter 5000 #AL57375 just require the 5 psi minimum to help keep the…

view full answer...

Answer 3

The Air Lift 1000 Heavy Duty Air Helper Springs part #AL60828HD which are a fit for a 2019+ Ram 1500 have a combined load leveling capacity of 2,100 lbs. That said, this will likely exceed the capacity of the truck as it relates to payload.

view full answer...

Answer 4

For ease of use it's recommended to add an onboard air compressor like the Air Command Compressor System item #F2610 when you install airbags. This will give you the ability to adjust the pressure in the air springs from the comfort of your cab.…

view full answer...

Answer 5

The Air Lift AirLift 1000HD Air Helper Springs for Coil Springs part #AL60828HD is a confirmed fit for your 2019 Ram 1500. These can be helpful in eliminating a lot of the sag you are experiencing. Keep in mind these do not increase your capacity…

view full answer...

Answer 6

Both the Firestone Coil-Rite Air Helper Springs part #F4185 and the Air Lift AirLift 1000 Air Helper Springs part #AL60818 are good options for your 2017 Ram 1500. The only real difference between the two is their pressure rating. As you previously…

view full answer...

Answer 7

For your 2018 Ram 1500 Quad cab I suggest the medium-duty AirLift 1000HD Air Helper Spring kit #AL60818HD. This coil helper spring kit fits both 2WD and 4WD trucks and provides up to 2100-lbs of rear-axle load leveling support for your cargo…

view full answer...

Answer 8

The use of a properly rated and installed weight distribution system will not require the use of additional suspension enhancements such as the Timbren Rear Suspension Enhancements. However, as your 2017 Ram 1500 has coil springs on the rear of the…

view full answer...

Answer 9

When selecting air bag helper springs I like to take into consideration not only the weight the truck can haul but also how often the truck carries heavy loads. As I see you have a 2019 Ram 1500 you have a few options. Do remember these will not…

view full answer...

Answer 10

Yes, if you are wanting to use the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88375 on your 2022 Ram 1500 you will have to cut off the jounce bumper bracket. We do have some other options for adding support to the rear suspension on your…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Recommended Air Spring Kit Without Internal Jounces for a 2022 Ram 1500 Night 4X4

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching