Dimensions of the etrailer Spare Tire Mount e98ZR

Question

Question:

Is there any reference material out there that shows all the dimensions of this product?

asked by: Nathan T

0

Expert Reply:

Yes, we have a few diagrams of the etrailer Spare Tire Mount item # e98ZR. I have attached them below.

expert reply by: Jerred H

0

Spare Tire Mount
(click to enlarge)

Answer 1

I do have an option for you but most hitch mounted spare tire carriers like the etrailer Hitch Mounted Spare Tire Carrier part #e98ZR aren't rated for motorhome wheels/tires. The main issue is that the mounting system won't accommodate wheels…

view full answer...

Answer 2

The etrailer Hitch Mounted Spare Tire Carrier #e98ZR will work with any spare wheel that has a bolt pattern up to 6 on 5-1/2. The tire size isn't really the deciding factor of fit, but rather the bolt pattern.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 8

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Jesus! The #e98ZR comes with an alignment collar and a hitch pin. The Curt #C31006 does not include these and costs a little more. Outside of that, they are the exact same spare mount with different branding. What rig are you setting this up on?

view full answer...

Dimensions of the etrailer Spare Tire Mount e98ZR

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching