Recommended Dual Motor Landing Gear For a 2013 KZ Inferno Toy Hauler

Question

Question:

2013 kz inferno need replacement dual motor landing gear. Bull dog 500708 or ultra fab or ?

asked by: Mike E

0

Expert Reply:

I recommend the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 over the Bulldog 500708. The Ultra-Fab is rated higher at 12,000lbs and is capable of 38" lift. This is 4,000lbs and 2" higher than the other. I have also heard of the Ultra-Fab having less issues and the motors being much more reliable.

expert reply by: Bud M

0

Answer 1

Your KZ New Vision Sportster would have either Lippert landing gear or a set that is compatible with the Lippert mounting bracket dimensions so for a replacement powered set you could use the #LC712690 which would bolt right up.

view full answer...

Answer 2

Lippert landing gear parts are sold under other brand names as well, such as Stromberg Carlson, Venture and Atwood, and often an alternate part fits and works perfectly well. You'll just want to match the length of the original lead/driver…

view full answer...

Answer 3

I can give you some information to help you determine if the Lead #LC179013 and Follow #LC179014 legs will fit your 2004 Arctic Fox 29.5E 5th wheel, but we don't really have a database to pull from when it comes to OEM part numbers on trailers.…

view full answer...

Answer 4

If the thrust bearing is broken on your VMC900R Venture landing gear you are going to need to replace the leg, which you would need to match by the length of the outer tube, which is likely going to be 29-1/2 inches, but please measure to verify.…

view full answer...

Answer 5

I attached a diagram that shows how the Lippert Components Venture Lead Leg Repair Kit #LG-146059 installs.

view full answer...

Answer 6

When it comes to adding a landing gear set to your 2010 Keystone Montana Hickory The Landing Gear Set w/ Handle #RVLG-8HDL will work for you. The landing gears have a durable, black powder coated outer tube and has zinc-finished inner tubes that…

view full answer...

Answer 7

In previous interactions we have found the 2010 Keystone Laredo 5th wheels to use Venture VMC900 landing gear. This would give you the Replacement Follow Leg #LC119101. I do recommend verifying this is the correct leg for you by measuring your…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Recommended Dual Motor Landing Gear For a 2013 KZ Inferno Toy Hauler

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching