What is the Weight of the MORryde Quick Connect RV Steps ST-211 # MR85HR?

Question

Question:

Im looking at the morryde st 221. I would like to know how much these steps weigh.

asked by: Sherrie

0

Expert Reply:

The MORryde Quick Connect RV Steps ST-211 # MR85HR weigh 34lbs.

expert reply by: Bud M

0

Sherrie

5/7/2024

Thanks Bud

Bud M.

5/7/2024

@Sherrie You're welcome!

Answer 1

The MORryde Quick Connect RV Steps #MR85HR is only able to mount with the bracket in a vertical position so that the clamp can grip the post on the bracket. The step you have pictured is an OEM option that's custom made for that specific trailer…

view full answer...

Answer 2

The widest point of the Lippert #LC733932 Solid Step is 24 inches, which is the dimension from the outside of one stringer to the outside of the other. The latching mechanism that holds the steps folded upright into their storage position is width…

view full answer...

Answer 3

Hello Ed, thanks for reaching out. The MORryde StepAbove RV Steps #MR26RR are designed to work with an entry height between 25" and 29". With only 22" between the threshold and the ground the step would not have enough room to open all…

view full answer...

Answer 4

Since you can't fold in the steps on your 2018 Winnebago Minnie I recommend the MORryde Quick Connect RV Steps for 21-1/2" to 27-1/2" Entry Height - 2 Steps #MR85HR. The mounting bracket for these steps attaches on the outside below…

view full answer...

Answer 5

Hey Steve, thanks for reaching out! You can try using the 3-Step MORryde StepAbove RV Steps #MR98RR, but since your height is 3" shorter than the minimum the stairs won't sit correctly which is why MORryde recommends the 2-Step #MR26RR. When…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

What is the Weight of the MORryde Quick Connect RV Steps ST-211 # MR85HR?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching