Will The MORryde StepAbove RV Steps MR26RR Work With 22" Entry Height?

Question

Question:

Will MORryde Step Above MR26RR work with 22 inch height. This would be the minimum height depending on how the trailer is leveled.

asked by: Ed

0

Expert Reply:

Hello Ed, thanks for reaching out. The MORryde StepAbove RV Steps # MR26RR are designed to work with an entry height between 25" and 29". With only 22" between the threshold and the ground the step would not have enough room to open all the way.

A better fold-down step option will be the Lippert SolidStep RV Steps # LC733932. This step will fit doorways between 29"-36" wide, and it will work perfectly with the 22" entry height.

expert reply by: Jesse M

0

Ed

10/9/2024

The problem with the Lippert Solid Step is that I have a 24" door width.

Jesse M.

10/9/2024

@Ed Gotcha. Unfortunately that along with the 22" entry height rules out all of the fold-down style steps we have. The # MR26RR will fit the 24" doorway width, but your threshold is too close to the ground and the step would not fold down all the way and would sit at a weird angle.

Answer 1

The MORryde Quick Connect RV Steps ST-211 #MR85HR weigh 34lbs.

view full answer...

Answer 2

The widest point of the Lippert #LC733932 Solid Step is 24 inches, which is the dimension from the outside of one stringer to the outside of the other. The latching mechanism that holds the steps folded upright into their storage position is width…

view full answer...

Answer 3

The Lippert SolidSteps part #LC713662 that you referenced look like the picture that I attached.

view full answer...

Answer 4

Hey Chris. I don't have a database that shows me what parts came with your Forest River R-Pod RP-189 so I'll need you to take a couple quick measurements to get you the right replacement steps. To find the correct replacement, you'll need…

view full answer...

Answer 5

Hey Steve, thanks for reaching out! You can try using the 3-Step MORryde StepAbove RV Steps #MR98RR, but since your height is 3" shorter than the minimum the stairs won't sit correctly which is why MORryde recommends the 2-Step #MR26RR. When…

view full answer...

Answer 6

The Lippert #LC698799 SolidStep Manual Fold-Down Steps are indeed designed for 24 inch wide RV door frames. This set of steps would be compatible with the width of your door.

view full answer...

Answer 7

Based on the measurements you provided of your 2019 Keystone Passport 171 EXP you'll need the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways #MR26RR. These steps have an entry height range of 25" - 29" and…

view full answer...

Answer 8

Since your door way width is 24 inches measured from flange to flange the correct MORryde StepAbove is the part #MR26RR. The part #MR86RR is for a smaller doorway width.

view full answer...

Answer 9

The doorway width - the width from flange to flange of your doorway - needs to be between 23-3/4 inches and 26-1/4 inches, so yes, your 24 inch door will allow you to use the MORryde steps you asked about, which are the following part number: -…

view full answer...

Answer 10

Hey Nathan, we have a solution with the MORryde StepAbove #MR26RR but the Lippert step you mentioned does not fit your RV doorway width. The MORryde StepAbove is basically the same thing made by a different company with slight differences.

view full answer...

Answer 11

For your 24 inch door there is a fit. You will want the SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames - Triple - Aluminum#LC698799. This 3 step option will fit your door frame and give you the 20 inch wide steps.

view full answer...

Answer 12

Hey John! Since your flange-to-flange measurement is 24" you need the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways #MR26RR. What drew you to the StepAbove Steps?

view full answer...

Will The MORryde StepAbove RV Steps MR26RR Work With 22" Entry Height?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching