MORryde Quick Connect RV Steps for 21-1/2" to 27-1/2" Entry Height - 2 Steps

MORryde RV Steps - MR85HR

Sturdy RV steps detach from under your camper door for tight spaces, and the legs individually adjust to uneven ground to provide a wobble-free step into your camper. Fits a threshold-to-ground height between 21-1/2" and 27-1/2".

Features:

• Removable entry steps make it easy to climb in and out of your travel trailer or 5th wheel
• Detachable so you won't get locked out if you park in a tight storage lot where you can't fold the steps down
  • Just squeeze the paddle latches to unclip the steps from the brackets
• Stable design is bounce- and wobble-free
  • Legs extend and individually adjust for maximum ground contact, even on uneven land
  • Legs have quick-release feature for easy adjustment or removal
• Safety features provide traction and reduce the potential for slipping in wet conditions
  • Textured step surface and non-slip tread tape help keep you from tripping
• Lightweight construction makes handling the steps virtually effortless
  • Aluminum step platforms are rustproof and scratch resistant
  • Powder coated steel frame resists corrosion
• Pre-assembled steps come with mounting hardware to ease installation
• Made in the USA

Specs:

• Application: travel trailers and 5th wheels
• Entry height (from ground to threshold): 21-1/2" - 27-1/2"
• Distance between brackets (outer edge): 29-5/8"
• Distance between studs (center to center): 25-1/4"
• Bracket dimensions: 5-1/2" long x 2" wide
  • Distance between mounting holes (center to center): 4-3/8"
• Drop/rise: 9"
• Leg extension length: 1" increments for a total of 13"
• Weight capacity: 500 lbs
• 1-Year limited warranty

Why the Quick Connect Steps Are Right for You

If you've ever stepped into a camper that has standard metal steps, you've probably felt that scary springboard effect that makes you reach for the handle. That bounce occurs because those pull-out steps never touch the ground. MORryde's Quick Connect steps have adjustable legs that steady the steps on the ground, so you can feel safe using them. Also, the steps are detachable, which means they aren't left out in the elements to rust or warp like factory steps.

MORryde Quick Connect vs. TorkLift and Brophy

But what makes these MORryde steps different from other detachable steps, the Brophy scissor steps or the TorkLift GlowSteps? The Quick Connect steps have a couple advantages over the Brophy or TorkLift steps.

First, the Quick Connect steps easily detach from the mounting brackets. This is handy if you want the sturdiness of the fold-down steps, without the inconvenience of permanently mounted steps that get in the way in tight situations. If you have to park close to another vehicle in a storage lot, for example, there might not be enough clearance to deploy your steps. With other fold-down steps, this means you can't deploy the steps and now they are blocking your entryway. The MORryde steps can be easily attached when you need them and detached and stored when the situation calls for it.

Second, the MORryde steps are fitted securely to their frame, with no folding points like on the Brophy scissor steps or the TorkLift GlowSteps. This makes them extra sturdy and less likely to bounce or move when you step on them. The camper won't rock as you climb in and out and you won't feel as though you may take a tumble at any moment while on the steps.

Will MORryde Quick Connect Entry Steps Work for You?

Snap-on steps are typically installed on travel trailers and 5th wheels. The Quick Connect steps from MORryde have two brackets that mount beneath your camper's door frame. The paddle latches allow you to clip the steps onto the brackets and to detach them for storage inside your camper.

Step 1: Measure the Entry Height

Measure from the doorway threshold to the ground. For these steps to work, you will need an entry height between 21-1/2" and 27-1/2".

If you find that you have a smaller or larger entry height, there are other step assemblies that fit entry heights ranging from 25" to 42". (See table below)

Step 2: Measure the Mounting Space

Measure the space beneath your camper's door frame. You will need a minimum distance of 1-3/4" from the bottom of the door frame to the bottom of the camper to attach the mounting brackets.

Find the Step that Works for You

If, after taking your camper's measurements, you find that these steps will not work for you, use the table below to determine which part number you need.

STP-221 MORryde QuickConnect Removable Entry Steps for 21-1/2" to 27-1/2" Entry Height - Double

Replaces STP54-011H and STP-221PH-230-09

Installation Details