Replacement Hardware Kit For Aries Pro Series Grille Guard # AAP5056

Question

Question:

I am looking for the mounting brackets for the Aries grille guard. I think part number is P5056. Can you help me.

asked by: Brian C

0

Expert Reply:

The Replacement Hardware Kit # AABRKT-5056 will fit the Aries Pro Series Grille Guard # AAP5056. This is the upgraded version of the Grille Guard # AA5056 which uses the same install hardware to attach to a truck.

expert reply by: Bud M

0

Answer 1

The Aries Grille Guard #AA5058 is only a confirmed fit for a 1500 series Ram pickup. This would use the Replacement Hardware Kit #AABRKT-5058. The Aries Grille Guard #AA5056 is the correct model for your 2012 Ram 2500 and would require the…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Daniel, thanks for all of the info you listed on your trailer axle. Based on seeing all of that the correct parts are what you mentioned. The brake assembly set part #23-464-465 is correct as well as the hub/drum part #42866UC3-EZ. Did you have…

view full answer...

Answer 8

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 9

Hey Ryan, yes the Firestone Air Bag and Compressor kit part #F24XV that you referenced is a confirmed fit for your 2026 Ram 2500 Power Wagon. Are you planning on towing a heavier trailer?

view full answer...

Answer 10

Hey Ethel, thanks for reaching out. No, I wouldn't recommend the Valterra StayPut Curved Leveler and Chock #VAL48MB if your tandem tires are only 4" apart. The wedges on the StayPut system need enough room to fit between the tires and create…

view full answer...

Answer 11

I called my contact at Weather Tech and they told me that is you have any step bars within 2 inches of the wheel well opening there is not fit for mud flaps. If you do have more than 2 inches from any step bars then the mud flaps that are designed to…

view full answer...

Replacement Hardware Kit For Aries Pro Series Grille Guard # AAP5056

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching