Adapter Needed For A Kuat NV 2.0 For 1-1/4" Receivers To Install In A 2" Trailer Hitch Receiver
Updated 04/30/2024 | Published 04/29/2024
Products Featured in This Question
Question:
Hello! I have a 2” hitch and a Kuat NV 2.0 bike rack designed for a 1.25”, fitted with an adapter. I’m looking to get a locking, anti-rattle hitch pin to replace my current pin which is very long and easy to cut but I think e98880 will be too thick, while the thinner 1.25”-hitch-compatible version will be too short. Do you know of any 2”-hitch-compatible ,locking, anti-rattle pins that have the smaller, 1/2” diameter but the longer length? I suspect I might be completely out of luck… Thanks for whatever info you have!
asked by: Madison
Expert Reply:
Hey Madison,
Kuat actually has 2" adapter # D101 that's designed to work with the 1-1/4" shank on your Kuat NV 2.0 # NV12B that will also work with your original hitch pin. You'll be able to remove the reducer you have in the receiver and slip the rack with this adapter on it right in and tighten down the anti-rattle device built into the shank to prevent movement. I've attached a video below where Aiden will walk you through installing it.
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Best Way to Use a Kuat Sherpa 2.0 Bike Rack on a 2" and a 1-1/4" Receiver
- Q&A: Adapter to Use a 2 Inch Kuat NV in a 1-1/4 Inch Trailer Hitch
- Video: What to Know About the Curt Rubber Tube Cover
- Video: Comprehensive Review: Kuat Bike Rack Shank Adapter
- Video: Let’s Check Out the Kuat Bike Rack Shank Adapter
- Search Results: trailer hitch plugs
- Search Results: trailer hitch covers
- Shop: Kuat Bike Rack Shank Adapter - 1-1/4" to 2"
- Shop: Curt Rubber Tube Cover - 2"
- Shop: etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel
- Search Results: curt trailer hitch receiver ~ custom fit ~ class iii ~ 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Feedback Sports RAKK 2.0 E Bike Floor Stand - Black - 1 Electric Bike
- Video: Installing the Curt Trailer Hitch Receiver on a 2025 Toyota RAV4
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer wiring
- Search Results: trailer tires and wheels
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Article: How to Measure for Trailer Hitch Drop
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
on Hitch Pins and Clips
Madison
4/30/2024
Thanks, Kevin! That’s what I’ve currently got going on. My concern is there have been a number of kuat-targeted thefts in my area due to the long and easy to cut hitch pin. I was hoping for something that would be flush to the receiver, like the anti-rattle pins.