Recommended Steering Stabilizer w/ a 2018 Jayco Redhawk SE 22c on a 4500 Chevy Cutaway Chassis

Question

Question:

Looking for a steering Stabilizer for a Jayco Redhawk 22C - SE on a 2018 chevy chassis 4500 with stabilitrak dually rear wheels...I found the Sumo Springs.

asked by: Victor L

0

Expert Reply:

I checked with Roadmaster and since your 2018 Jayco Redhawk SE 22c was built on a 4500 Chevy chassis you will need the RM Reflex Steering Stabilizer w Mount Brackets for Class C M item # RM-RBK23-RSSC. This fits the 4500 cutaways.

I have linked an installation video below so you can see how to get it set up.

expert reply by: Jerred H

0

Victor

4/30/2024

Thank you

Jerred H.

5/1/2024

@Victor You're welcome! Happy to help!

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Don, thanks for reaching out. Yeah, the driver’s side on those F53 chassis can get tight, you’ve usually got brake lines, wiring, or a bracket sitting right where you want that Timbren to live. You’re doing the right thing paying attention to it,…

view full answer...

Answer 6

Thanks for reaching out, Jeff. I was able to get some details for you on that. The Bright Way Solar Battery Charger #BRW54FR is rated IP65, which means it’s dust-tight and water-resistant—but not fully waterproof. So it’ll handle things like rain or…

view full answer...

Answer 7

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 8

To install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 in your Freightliner S2RV chassis all you need is the install harness part #3027-P which plugs into a connector behind the steering column panel.

view full answer...

Answer 9

We can get you all the parts needed to convert from electric drum brakes to disc brakes on you tandem axle trailer, but there's a bit of information needed in order to do this. First, since you will be replacing your hubs, you have to find the…

view full answer...

Answer 10

Firestone does have an air bag kit that fits your 2005 Ford E-450 Class C motorhome with the part #F2153 but this has a weight capacity of 4,800 lbs. They do not offer a Red Label 7,500 lb capacity kit that fits your chassis at this time.

view full answer...

Answer 11

Hi Matt, For a 2024 Nexus Ghost 33DS on an International MV607 chassis you'll need the following components: Anti-Sway Bars: (does not fit models with optional air suspension system) Front #RM67MR Rear #RM77MR Steering Stabilizer #RM46MR We…

view full answer...

Recommended Steering Stabilizer w/ a 2018 Jayco Redhawk SE 22c on a 4500 Chevy Cutaway Chassis

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching