What Size Bolts Should be Used with Hitch for 1998 Chevy K2500

Question

Question:

Can you guys tell me what size bolts I need for a trailer hitch on a 1998 K2500?

asked by: Christopher C

0

Expert Reply:

Hey Chris, the Curt hitch part # C14081 that fits your 1998 Chevy K2500 uses the bolt size 1/2-13 UNC,2,GRD8.

expert reply by: Jameson C

0

Answer 1

Yes, the bolts are indeed both M12 x 1.25 bolts for both the hitches you mentioned, the Curt Trailer Hitch Receiver #C11265 and #C13149. So you can use a thread tap for those M12 x 1.25 bolts and you'd be set.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hello Joe, thanks for reaching out. Yes, we do have a hitch for the 1993 Chevy C1500 short bed. For that I recommend the following: - Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" #C14081 This will fit short bed pickup models with a…

view full answer...

Answer 8

Hey Tanya, do you know any more info about the 2000 GMC truck? Is it a 1500 or a 2500LD? Or is it something different? Is it listed as a Sierra or one of the older C/K style trucks?

view full answer...

Answer 9

While we do not have a receiver that is specifically designed to work with your 1996 Chevrolet C2500 having the Tommy liftgate, I do have some measurements that may help you determine if one will fit your truck. You will need to measure the height…

view full answer...

Answer 10

Hey Matthew, welcome back! For a gooseneck pin box I recommend the new MORryde GooseTech 5th Wheel to Gooseneck Pin Box like #MR47MV. The GooseTech uses the same technology as their cushioned pin boxes and will give you a smooth ride by eliminating…

view full answer...

Answer 11

Hi Al; with a 7-way already installed the only thing you need to use trailer brakes is the brake controller. I believe all of the 2015 Silverado 2500 models come with the factory wiring. If there is a plug that looks like the #HM40975 connected to a…

view full answer...

Answer 12

The Curt Trailer Hitch Receiver part #C13042 is what I recommend for a 1996 GMC Sierra C1500. This hitch features a bolt-on design with hidden crosstube. I checked with Curt and this hitch will work on models with a factory full-size spare tire so it…

view full answer...

What Size Bolts Should be Used with Hitch for 1998 Chevy K2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching