How Do I Install The C13800 Coupler If The Tongue Only Has One Hole
Updated 04/16/2024 | Published 04/15/2024
Products Featured in This Question
Question:
How do I install a 13800 on my Montero 2001 if I see only one hole with nut at both sides? Please advise
asked by: Anibal V
0
Expert Reply:
Hello Anibal. The Trailer Coupler # C13800 does require 2 bolts for mounting to the tongue. If your trailer only has 1 bolt hole, a second hole will need to be drilled. The mounting holes need to be 3" apart on center. I am not sure how the original coupler was only installed with 1 bolt, but you will definitely need to add a second hole. For hardware I recommend you use the Curt Channel-Mount Coupler Hardware Kit # C25388.
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Trailer Hitch for 2001 Mitsubishi Montero Limited
- Q&A: Recommended Hitch and Wiring Harness for a 2002 Mitsubishi Montero
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Review of CURT Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55380
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Shop: Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Q&A: Is The Curt C13800 Hitch For A 2001 Mitsubishi Montero A No-Drill Install?
- Q&A: Recommended Trailer Hitch for a 2003 Mitsubishi Montero
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: 1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 4" Drop - 7,500 lbs
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
Explore Expert Info
![Our Expert]()
on Trailer Hitch
on Trailer Hitch
