Result: shipping

Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…

The EZ Coupler Cap #F02-3106CL has 4 tabs that will fit over the 4 lugs on the sewer drain valve. It does have a 3/4" male thread hose coupler that will allow you to drain your gray water tank without needing your larger sewer hose. It is also…

A trailer tire size 175/80-13 will replace either an A78-13 or B78-13 trailer tire. A 175/80-13 is going to have 3 load ratings: B at 1,100 pounds at 35 psi, C at 1,360 pounds at 50 psi, and D at 1,610 pounds at 65 psi. This size will have a diameter…

The correct replacement size for a B78-13ST is a 175/80-13. For this, I recommend the Provider ST175/80R13 Radial Trailer Tire part #TTWTRTM1758013C which is an excellent radial ply option that will run cooler. It also has an 81 mph and two-year…

In the brake controller wiring diagram there is a 40 amp breaker and circuit that is pictured but it is not required for the install and wiring of the brake controller. That's a totally separate circuit that is typically used for charging the…

It sounds like you're looking for the torque specs for the lug nuts on a 6,000 pound axle. For a hub with 1/2 inch studs, 90 to 95 foot-pounds is standard.

For the Ventline Range Hood part #S0721-20BD-F-1 that you referenced we do have a replacement fan motor with the part #BVD0218-00-R. And then for a replacement light bulb you'd want the #VA0415-00 and you'd be set.

I attached a wiring diagram for the Kwikee Step Motor Conversion/Upgrade Kit #LC379145 for you to check out but there isn't a pink wire so maybe you are looking at a diagram for a different motor kit.

Light kit #e98943-44LED can be added to the etrailer carrier #e98874. A light kit is only required if your gear blocks your vehicle's tail lights.

The best cover/bag to use with the 24x60 etrailer Cargo Carrier #e98874 is the etrailer cargo bag part #988501 which is the perfect size for the carrier you have and has straps that will secure it to the carrier so you wouldn't need a net to…

Etrailer hitch-mount cargo basket #e98874 can be fitted with the light kit #e98943-44LED. Light kits are required if your loaded cargo interferes with other motorists' view of the vehicle's lights.

If you've got a cargo carrier like the etrailer #e98874 that you're using the etrailer Cargo Bag #988501 with, then you can use the Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers #20174 and mounting bracket #e98943 to give…