Recommended Suspension Enhancement for a 2019 Toyota Tundra

Question

Question:

I have a 2019 Tundra TRD Pro. I will be towing a dual axle cargo trailer that is 1800lbs empty. I am moving and will make multiple 650 mile trips. Will the yellow SumoSprings be a good choice to reduce sagging on this model truck? The stock suspension on the TRD Pro is a bit different than the other Tundra models. I’m not sure what the trailer will weigh on each trip it is rated at GVWR 7000lbs but I don’t think I’ll reach that. Thank You

asked by: Charles B

0

Expert Reply:

Charles, yes the SumoSprings Solo Custom Helper Springs # SSR-610-54 you're looking at will work great in reducing any sag you might experience towing your trailer.

These springs at 50 percent compression have a 2,800 lb weight capacity which should be more than enough to keep your ride level. It's also worth mentioning that SumoSprings are not going to increase your vehicle's weight carrying capacity, so you'll just want to be mindful of that.

expert reply by: Bryce D

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 7

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Recommended Suspension Enhancement for a 2019 Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching