Is The Spacer Kit # T68MR Compatible With Timbren Springs # TGMRYS4?

Question

Question:

I have a GMC Yukon and need a spacer between the Timbren Rear Suspension Enhancement System - TGMRYS4 so the Timbren engages sooner. I like that this part comes with 2 different sized spacers and includes bolt, whereas two A25723-90AH00 are about the same price and do not include bolts. Will the T68MR work with the TGMRYS4 on the2012 Yukon Denali?

asked by: Scott

0

Expert Reply:

While the spacers included in the Kit # T68MR will work with your Timbren Springs # TGMRYS4 they do not use the same mounting bolts. Your GMC Yukon uses 3/8" hardware while the spacer kit includes M10 hardware so you would still need to source the longer bolts in your 3/8" thread size.

expert reply by: Bud M

0

Answer 1

The Timbren Spacer Kit #T68MR contains two of the 1/2" Spacers #TA25722-90P00 and two of the 1" Spacers #A25723-90AH00 which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the…

view full answer...

Answer 2

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.

view full answer...

Answer 3

Hello Bryan, thanks for reaching out. If the total tongue weight of whatever you are hauling is around 650, I recommend going with the 1,000 lb SumoSprings part #SS65FR. This will give you the support and stability you are looking for without making…

view full answer...

Answer 4

Hi Edward, The SumoSprings Solo Custom Helper Springs #SS65FR is listed as not a fit for Trail Boss or ZR2 models so you would want to swap out those jounce springs for the SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA28. This…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

When the SumoSprings Solo Custom Helper Springs item #SS65FR are installed on your 2020 GMC Sierra 1500 you will have a 1/2" - 1" of clearance with no additional cargo weight. This allows for you to have a comfortable ride when you are…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hello Graham, thanks for reaching out. So far I have been pretty impressed with the PacBrake air bags. I would say they are in line with the quality of the Air Lift air bags. They use similar top plates. Pretty much everything about the design of…

view full answer...

Answer 12

Hi Bernie! From everything I could find about your 2025 Chevy Silverado 1500 Custom, the mirrors are the same as the higher trim models (see attached image). The Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side #LO54FR will fit…

view full answer...

Is The Spacer Kit # T68MR Compatible With Timbren Springs # TGMRYS4?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching