How to Make Over-Under Conversion Kit for 1-5/8" Diameter Utility Trailer Axle

Question

Question:

Hi, Im looking for a spring over axle kit for a 5x8 utility trailer. Axle is round and measures 1 5/8 diameter. I havent been able find a kit for an axle this size. Please let me know if you have such a kit. Thanks

asked by: Greg L

0

Expert Reply:

Since nobody makes a kit for axles smaller than 2-3/8" diameter you will have to put it together. You also want to double check that axle diameter. More than likely it is the standard 1-3/4" and not 1-5/8". You will need to have a certified welder add a spring seat on top of the axle on either side using # TRSS175. Once this is done, you can use # CE23000 to complete the conversion.

expert reply by: Robin H

0

Answer 1

Hi Justin; do the leaf springs run under your axle (underslung) or are they sitting on top of the axle (overslung)? If you have the underslung configuration you can use the Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 you were looking…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

How to Make Over-Under Conversion Kit for 1-5/8" Diameter Utility Trailer Axle

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching