Replacement Lug Nut Covers For The Phoenix USA Rear hub Cover # PXQ820R

Question

Question:

30mm Lug Nuts - ABS Plastic I need 6 more thanks

asked by: Jose

0

Expert Reply:

Hi Jose,

Phoenix USA doesn't list the lug nuts of the Phoenix USA Rear Hub Cover w/ Pop Out # PXQ820R as a replacement item but I'm sure if you gave them a call they be happy to send you some replacements.

expert reply by: Kevin C

0

Answer 1

Hello John. We do offer center caps for the 8 lug wheels. Take a look at the Phoenix USA Rear Wheel Center Cap #PXPH1843. This will fit wheels with a 8 on 275mm bolt pattern and will fit hubs with a diameter of 6-1/2" or 8-1/4". So, as long…

view full answer...

Answer 2

The stud doesn't matter when it comes to the wheel cap, you just need to measure the width of the lug nut to ensure the Phoenix USA Rear Hub Cover w/ Pop Out #PXQ822R or Phoenix USA Rear Hub Cover w/ Pop Out #PXQ820R will fit the lug nut. The…

view full answer...

Answer 3

I reached out to my contact at Phoenix USA and the Phoenix USA Front Hub Cover w/ Pop Out - 8 on 275mm - 33mm Lug Nuts - ABS Plastic #PXQ822F you were looking at will work with your 2014 Thor Challenger with 8 lug 22.5" wheels as long as your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 9

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 10

Hey Don, thanks for reaching out. Yeah, the driver’s side on those F53 chassis can get tight, you’ve usually got brake lines, wiring, or a bracket sitting right where you want that Timbren to live. You’re doing the right thing paying attention to it,…

view full answer...

Answer 11

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 12

Hey Josh! Yes, the Pacbrake Alpha XD Pro Air Bag Suspension Kit w/ Internal Jounce Bumpers #PB89RV will fit your Sprinter. This is specifically designed for models with dual rear wheels. The only reason these wouldn't work is if you have the ride…

view full answer...

Replacement Lug Nut Covers For The Phoenix USA Rear hub Cover # PXQ820R

Product Page this Question was Asked From

Continue Researching