Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Upgrade your plain rear wheel and hide those ugly, exposed lug nuts. This durable, ABS plastic hub cover with matching lug nut covers fits 8 on 275mm bolt patterns. Pop out center gives you easy hub access to grease your wheel bearings.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Phoenix USA ABS plastic hub cover for a rear wheel with an 8 lug, 275 millimeter bolt circle that uses 20 millimeter lugs. So this is for a quantity of one hub cover. Now this hub cover will upgrade the appearance of your rear truck wheel; it covers the ugly axle hub in the center of your wheel. It does include the hub cover. It includes this pop out center cover and then eight of the screw on ABS plastic lug nut covers for 20 millimeter lugs. All these parts are a durable ABS plastic construction.
They're a nice polished chrome finish. The pop out center is nice because it gives you access to your axle hub without having to remove the whole hub cover.It's a very simple installation. It installs onto the wheels by using these included lug nut covers. All you do is line it up with the lugs on your wheels. Go ahead and push it on.
Take these threaded lug nut covers, put it on there, thread it on there, and once you get them all on you have a nice finished look to your wheel. This is designed to fit a wheel bolt pattern. It's a rear wheel fit that has an 8 by 275 millimeter bolt pattern. It is for a quantity of one hub cover.I am going to snap this pop out center in here and then we're going to give you a measurement of it. You'll notice there's two notches, one here and 180 degrees there's one from it, and then there's two openings here.
So you just sort of line that up. Once you get it lined up, just go ahead and snap it on. So we'll give you the diameter on this. Overall diameter from edge to edge is going to be right at 13 13/16". And the overall height on this is going to be right at 7 3/4" tall.
And if you do have to remove that pop out center, those notches I showed you, one on each side, they're large enough to put a large screwdriver, flat tip in there, twist it, and it'll pop that cover right off.But that should do it for the review on the Phoenix USA ABS plastic hub cover for a rear wheel with an 8 lug, 275 millimeter bolt circle that uses 20 millimeter lugs.
Customer Satisfaction Score:
81% were satisfied with this product
19% of customers were not satisfied
Ratings & Reviews
excellent product and service
Great product
Etrailer is the best.
Perfect match to my missing wheel cover, great condition
This cap is for our Ford service truck. Pleasantly surprised that e-tailer supplied this and had it in stock. The product was an exact match, our truck is back to looking sharp and professional.
It’s disheartening realizing now that there is not an option to keep these on my truck. This is my first set and I do not have the lug nut covers.
Perfect fit 100% recomendado
they fit my motorhome perfectly and look wonderful.
After loosing 3 hubcaps courtesy of I-10 through AZ, these caps fit better and worked great. They have tamed the AZ and New Mexico highways that are brutal
High quality hub cover nice chrome for rear Alcoa 19.5 rims 2021 ford xlf600
Thank you for getting the right part match to the year of the vehicle! Was skeptical it was the wrong one but it fit perfect, it does in fact fit the newer style lug nuts after 17
This was a good fit for my F53 ford chassis. I noticed the old cover had a cut out on one lug nut area to accommodate the holder for the inner rear tire air inflation. The metal holder didn’t allow the treads to catch the nut, so I had to use an oscillating cutter to make it work. Took a lot of time and several tries before it was secured. Kind of marked up the crime plastic too.
Nothing wrong with the product , but it would be nice if they sold one with the cut out to avoid having to do this work!!!
Thanks etrailer, this was an easy insta ll!
Fats excellent service! Exact replacement for my 2006 Jayco Seneca 19.5 Alcoa Wheels.
These fit my 2007 Jayco Seneca 35gs RV rear alcoa rims. One of the caps had a mark on them between the lug stud holes. I would not come off. I put it on the driver's side because that is the less viewed wheel (sewage hookup side). Not noticeable from 5 feet away.
Parts stores were at a loss on getting replacement nuts for these covers on my 05 Kodiak 4500 with 19.5” wheels. Etrailers price for a full cover was lower than some generic push-on caps.
Quick and exactly what I was looking for. My hot or home wheels look amazing again!
looks great but I’m going to need the 22mm lug covers
David
7/27/2026
Very happy with them and they still look like new
Jerred H.
7/27/2026
Do you have a question about this Wheel Covers Hubcap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
5/19/2023
Oh, no! A blank review cant be a good sign. If you would like to add any comments we are all ears.