Height of Dexter Trailer Hub DX22XR

Question

Question:

What is the height of the hub if it is resting on a table top? Or what is the width if it was mounted on an axle? My current hub is 3.5

asked by: Mike

0

Expert Reply:

The height (as if the hub was resting on a table top) is 4-1/16 inches for the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR.

expert reply by: Kyle S

0

Height of Dexter Hub DX22XR
(click to enlarge)

Answer 1

If your 2020 Hyundai Elantra is a GT Hatchback, the DrawTite Hitch #24905 will fit as long as it is not one of the models that was mad IN Korea. If your 2020 Hyundai Elantra is a GT Hatchback, but is not an N line model and does not have dual…

view full answer...

Answer 2

Hi Nicolas, Thank you for all the measurements and info you provided! That definitely made it a lot easier to get this figured out for you. Based off all the measurements, the Dexter Trailer Idler Hub Assembly for 2,500lb Axles part #DX22XR is the…

view full answer...

Answer 3

I do have one hub that uses a .75" ( #LM11949) outer and a 1.25" ( #LM67048) inner bearing. This bearing combination is uncommon these days, but we have the hub #DX22XR. This is a 5 on 4-1/2" idler hub for a 2,500 lb axle. Bearings,…

view full answer...

Answer 4

If you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal. Currently I do see we carry 2 hubs which use the Inner Bearing #LM67048 and…

view full answer...

Answer 5

Dico was bought out by Titan who now offers 5-on 4-1/2 idler hub #DX22XR. This hub is rated for 2500-lb axles and includes bearings, races, grease seal, grease cap, and lug nuts. You can be assured it will fit the trailer spindle as long as the…

view full answer...

Answer 6

A bearing with a 0.75" inner diameter is LM11949 and a bearing with a 1.25" inner diameter is LM67048, and we don't have a hub with a 6 on 5-1/2" bolt pattern. For a hub with a LM11949 outer bearing and LM67048 inner bearing, the…

view full answer...

Answer 7

The inner and outer bearing numbers you provided and in-line with axles that have a 2,500 lb weight capacity. Therefore, it is likely that you have a 2,500 lb axle or the spindles have been swapped out for a smaller version. The only trailer idler…

view full answer...

Answer 8

The LM67000LA is a Timken part number for a bearing cone with a 1.250" I.D. and a 2.328" O.D. This is the same as our bearing part #LM67048. The LM67010 is a Timken part number for a race with a 2.328" O.D. that matches our part…

view full answer...

Height of Dexter Trailer Hub DX22XR

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching