Parts Needed to Install a Redarc Tow-Pro Trailer Brake Controller on a 2024 Chevy Silverado 1500

Question

Question:

What parts will I need to install a Redarc Trailer Brake controller on my 2024 Chevrolet Silverado 1500?

asked by: Hans

0

Expert Reply:

To install either the Redarc Liberty # RED24FR or Elite # RED44FR on your 2024 Chevrolet Silverado 1500 you will need the Wiring Adapters # 3064-P and # 331-TPH-017. These will allow you to plug into the factory tow package wiring.

expert reply by: Bud M

0

Answer 1

For your 2024 Chevy Silverado 1500 I recommend the Redarc Tow Pro Elite #RED63RR. You can use it along with the Plug in Adapter #3064-P for a plug and play install, since you already have the factory tow package. The Redarc controller is going to be…

view full answer...

Answer 2

The best option we have for you is the 3rd Brake Light Logic Module #PP20-702 which connects to the left and right stop/turn circuits on your 2023 Chevy Silverado 1500 and filters out the turn signals so you just have the brake signal for your…

view full answer...

Answer 3

Yes Paul, you'll just want the 3rd Brake Light Logic Module #PP20-702. This wiring harness filters out unwanted turn signal input to make sure your 3rd brake light turns on only when brakes are applied.

view full answer...

Answer 4

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...

Answer 5

Yes, there is a way to make this work so you can plug the brake controller into the port under the dash on your 2024 Silverado 2500. Curt has the #C51525 wiring harness which is compatible with your truck. This wiring harness, along with the…

view full answer...

Answer 6

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Hello Fred, thanks for reaching out. We do have brake controllers that can be used on your 2025 Ford Ranger, but I am sorry to say we do not have anything with a custom pigtail for the factory under dash EBC plug. All of the options we have at this…

view full answer...

Answer 9

For your 2005 Jeep TJ Unlimited Rubicon I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. This proportional brake controller has a 3-Axis accelerometer which allows you to mount the main unit in any position out of sight which means…

view full answer...

Answer 10

Factory brake controllers seem to unfortunately be very temperamental and usually quite a bit more expensive that an aftermarket brake controller so I have to recommend going with an aftermarket option. Luckily there is a brake controller port so…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Mark, thanks for reaching out. I can definitely help with that. Does your Explorer already have the factory 4-flat trailer connection? If so, the Curt Echo #C51180 can work great and will require less installation time than really any other…

view full answer...

Parts Needed to Install a Redarc Tow-Pro Trailer Brake Controller on a 2024 Chevy Silverado 1500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching