bing tracking image
Q & A Icon

Troubleshooting Hopkins 4-Way Installed on 2018 Chevy Express that Has Voltage on Yellow and Brown  

Published 12/28/2023

Question:

I installed Hopkins wiring harness #41345 on my 2018 chevy express. After the installation, I have 12 volts actual reading is closer to 14, on both the brown and yellow pins on the 4 way connector when the van is running. This means that my passenger taillight on the trailer is always bright and no brake light/turn signal. I initially thought it was a bad controller and took the unit back and got a new one which did the same thing. The brake lights and turn signal on my van work fine.

0

Expert Reply:

What you described sounds like the converter box of the # 31345 shorted out as that's what they typically do when they encounter a short on the trailer wiring. Did you connect to trailer wiring before you tested the pins of Hopkins? If so I would feel pretty confident that your trailer has a short which is damaging the converter box.

So if that's the case try and find and fix the trailer wiring short and then you'll need to replace the # 31345.

expert reply by:
0
Jameson C

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching