Availability of Trailer Hub/Drum and Brake Assembly that Fits 10 inch Wheel with 4 Lug Pattern
Question:
I have a motorcycle/sidecar rig and I’m investigating how to add a brake to the sidecar. The max wheel load is 400 lbs. It has a 10”, 4 stud wheel. Do you have any brakes small enough to possibly work?
asked by: Fred T
0
Expert Reply:
The Dexter hub/drum part # 8-173-16UC3 has a 4 on 4 inch bolt pattern and can fit behind a 10 inch wheel. For a brake assembly you'd then want the part # AKEBRK-2R which is a right hand side assembly.
The hub is designed to fit the spindle part # TRU97FR which has a diameter of 1.00 inch.
expert reply by:
Jameson C
0
Products Referenced in This Question
Electric Trailer Brake Assembly - 7" - Right Hand - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- etrailer
more information >
Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Replacement Converter for Magnetek Series 900 Model 950 in RV
- Q&A: Can the Dutton-Lanison Drill Drive Socket Adapter Be Used to Raise/Lower the Roof On a Jayco Pop Up
- Q&A: Does Dexter Trailer Hub and Drum Assembly K08-174-90 Come as a Pair
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Replacement Brakes Needed for 1995 Jayco Pop Up Series 1207
- Q&A: Where to Find The Axle Serial Number On Dexter Axles Manufactured After April 2001?
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: How to Repair an RV Roof