Does Dometic Thermostat DMC79FR Have Bluetooth Compatibility

Question

Question:

Does the thermostat you list actually the Bluetooth capable model? Please confirm actual item. I have ordered from other vendors claiming it is the Dometic CT Bluetooth and what they ship isn’t Bluetooth. I have returned theirs twice..

asked by: Raymond L

0

Expert Reply:

The replacement Dometic Thermostat part # DMC79FR that you referenced does for sure have Bluetooth capabilities.

expert reply by: Jameson C

0

Paul

4/20/2024

How do you pair with it. My phone is not detecting it?

Jameson C.

4/22/2024

@Paul Do you have the Dometic CT Bluetooth app? Here's Dometics instructions: To connect to a Bluetooth® device from the Dometic CT Bluetooth app, choose ADD NEW CONNECTION. Press the POWER / MODE button on the CT Bluetooth thermostat until you reach OFF. Select your CT Bluetooth thermostat from the list that appears on the app and choose PAIR WITH SELECTED THERMOSTAT.

Paul D.

4/23/2024

@JamesonC Thanks, I tried the above, but I think my 7 year old wall unit needs replacing. No response, and no more degrees F and C. Just a series of single digits between 1 and 9. It still gets the control box going and runs the roof unit. I plan to order a new wall unit. Appreciate your help!

Tom M.

7/20/2025

Where is the app?

Jameson C.

7/21/2025

@TomM Look for the app called Dometic Climate

Tom M.

7/31/2025

Does not work, no Bluetooth.app only mentions camp light

Answer D.

7/31/2025

@JamesonC Hello Thank you for reaching out to Dometic. Unfortunately, we do not offer the blue tooth thermostats any longer and the blue tooth are no longer available. These have been obsolete for some time. Nicole

See All (5) Replies to Tom M. ∨

Tom M.

7/22/2025

Looking to replace my existing stat with blue tooth enabled. Have Dometic Brisk II. Can this be done? What do I need? That app says it’s for the Fresh Jet series. I now have a Dometic single zone stat with cool, furnace, and heat pump.

Jameson C.

7/22/2025

@TomM Yes the # DMC79FR will work for you as it is for Dometic units like what you have and it also has the Bluetooth capabilities like you are wanting as well. The app you need is the Dometic Climate app in your phones app store.

Answer 1

From left to right the 3 wires on the Dometic CT Thermostat like the #DMC79FR are 12V-, Comms, and 12V+. I have attached a wiring diagram below for your reference.

view full answer...

Answer 2

Realistically it is best to stick with a Dometic replacement thermostat for your Dometic setup. The #DMC79FR is the correct replacement for your 3316410.012. It may be possible to use a universal thermostat like the #CAM09221 you looked at but this…

view full answer...

Answer 3

The Furrion RV Stereo #DV3300SBL can be paired to your smartphone by completing the following steps: 1. Activate Bluetooth mode on your mobile device. Then press the Bluetooth button on the front panel of DV3300S to enter pairing mode. 2. When…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Does Dometic Thermostat DMC79FR Have Bluetooth Compatibility

Product Page this Question was Asked From

Continue Researching