Replacement 7-Way and 4-Way Connector for a 2014 Ford F-150

Question

Question:

I have a 2014 Ford F-150 XLT. The factory trailer light plug is worn out. Do you have a in replacement? Do you have one that has both the flat connector and the round connector?

asked by: Brian L

0

Expert Reply:

Yes, we do! To replace the 7-way connector on your 2014 Ford F-150 XLT you will want the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket item # HM40975. This will replace your worn out factory connector and provide you with a brand new 7-way and 4-way connector.

expert reply by: Jerred H

0

Answer 1

If your 2014 Ford F-150 does not have any trailer wiring at all the only options for adding a 4-way would be a hardwire kit like the part #18252 which would splice in by using the included quick splices to connect to the correct circuits.

view full answer...

Answer 2

To use a 7-pin with your 2014 Ford F-150, the first thing you will need to add is a 4-pin flat plug, #C56110. From there you would need to add Universal Installation Kit #ETBC7 and you're set.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Replacement 7-Way and 4-Way Connector for a 2014 Ford F-150

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching