Correct Replacement for a Kwikee 1800709 Step Controller

Question

Question:

i need the replacement for part #1800709REVOF

asked by: Wayne M

0

Expert Reply:

The correct replacement part for your Kwikee step controller part 1800709 is the Replacement Control Unit for Kwikee 38 Series Electric RV Steps # LC363989.

expert reply by: Bryce D

0

Answer 1

I recommend using the 4-Way Tester Plug for Kwikee Electric RV Steps - Packard Connector #LC379416. This 4-way tester plugs into the linkage assembly of your Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide #LC372261 so…

view full answer...

Answer 2

Hello Ken. We do offer a replacement for the Kwikee 1800709 control module. The correct replacement is the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989.

view full answer...

Answer 3

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 4

We do have the correct replacement controller for the Kwikee 1800709 you have. What you need is the Replacement Control Unit #LC363989.

view full answer...

Answer 5

We do have a direct replacement for your Kwikee Steps 1800709 controller - this is found as the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989 on our site. Our part numbers may differ from the manufacturers but I've…

view full answer...

Answer 6

The correct replacement controller for your Kwikee Single Step with old controller part 1800709 is the Replacement Control Unit for Kwikee 38 Series Electric RV Steps part #LC363989. This will use the same connector you have now for a plug and play…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Correct Replacement for a Kwikee 1800709 Step Controller

Product Page this Question was Asked From

Continue Researching