Replacement Hubs and Brakes for UFP HD-1877-10
Updated 10/31/2023 | Published 10/27/2023
Products Featured in This Question
Question:
I have a boat trailer with hydraulic brakes that I need to replace the complete assembly with the backing plates and drums. The brake drum/hubs that I have on it now are UFP HD-1877-10. I need to replace both sides. Thanks for your help.
asked by: Martin
Expert Reply:
I reached out to Dexter and found that the UFP-HD-1877-10 fits a standard 3,500 lb axle. For a hub and drum replacement you can use the # AKHD-545-35-EZ-K or for a galvanized option # AKHD-545-35-G-EZ-K. Then for hydraulic drum brakes you can use the # AKUBRK-35 or # AKFBBRK-35-D with a Dacromet coating.
I have attached some installation videos below for your reference.
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: bunks
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Search Results: fender steps
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Mounting Hardware for 10" Brake Assemblies
- Video: CE Smith Carpeted Bunk Boards for Boat Trailers Feature Review
- Q&A: Are There Tandem Axle Trailer Fenders Close to 63" Long, 14-1/2" Tall & 9" Wide
- Article: Trailer Tire Sizing
- Q&A: Wheel Bearings and Brakes for 3,500 lb Trailer Axle of EZ Loader Boat Trailer
- Q&A: Demco vs. etrailer Hydraulic Dacromet 3,500 lb Trailer Brakes
- Search Results: 84546uc3~ez
- Search Results: 40716~15
- Search Results: akhd~545~35~k
- Search Results: l68149
- Search Results: akubrk~35
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Video: Feature Review Trailer Hub and Drum Assembly
- Video: Feature Breakdown: Tandem Axle Teardrop Trailer Fenders
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Mounting Flange Bolt Pattern of Etrailer.com Hydraulic Trailer Brake Kit AKUBRK-35
- Shop: Gooseneck Hitch
- Video: Feature Breakdown: Demco Hydraulic Brake Kit
- Q&A: Finding the Correct Spindle Size for Hub
- Q&A: Looking For Replacement MasterPro 581750 Hubs On A Yacht Club Pontoon Trailer