Replacement Inner Member for Old A-60 on 2004 Trailer
Updated 03/21/2026 | Published 03/19/2026
Products Featured in This Question
Question:
I am fixing up my trailer which is a 2003 or 2004, the surge brake master cylinder is rusty and leaking, I presume the shock needs replacing, and the breakaway cable was cut when I purchased. Give all the items that need fixing I would like to replace the whole . I was looking at the DX97FR thinking that would be the appropriate replacement. The trailer is a tandem but only brakes on the back, drum brakes, and I believe it is A-60 rated for 6,500 LBs but my understanding is the rating was just updated to 7,500 LBs. Do you think this is the correct part, if not can you provide suggestions. Look at the attached pictures.
asked by: Howard W
(click to enlarge)
(click to enlarge)
Expert Reply:
Hey Howard! Yes, I think the Replacement Inner Member for Dexter DX7.5L Brake Actuator # DX97FR will replace what you have. It has the same body, just a different coupler on the end, so it will line up in the old housing.
If you want to save some money, pick up the Dexter DX7.5L A-60 Brake Actuator # DX77FR instead. At least for the time being it has a lower cost and comes with the primed housing. You can remove the housing, it has the same inner member.
What kind of trailer are you working on?
Chuck
3/21/2026
I used a Dexter to replace my hitch and worked great. Easy to install Etrailer was very helpful finding the right part Very satisfied
Product Page this Question was Asked From
Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Inner Member
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: brake actuator
- Shop: Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs
- Search Results: hydraulic trailer brake kit
- Search Results: akhd~545~35k
- Search Results: ufp a~60
- Shop: Dexter DX7.5L A-60 Brake Actuator - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs
- Search Results: al ko 7230
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: brake filler cap
- Shop: Dexter DX7.5L A-60SXL Surge Brake Actuator - Drum - 2" Ball - Primed - 7.5K
- Shop: Dexter DX7.5L A-60SXL Surge Brake Actuator - Drum - 2" Ball - Zinc - 7.5K
- Shop: Replacement Shock Absorber Spring Kit for Dexter Brake Actuators
- Shop: Dexter DX7.5L A-60L Surge Brake Actuator - Drum - 2" Ball - Primed - 7.5K
- Search Results: flexible brake hose
- Video: Review of Dexter Brake Actuator - A-60 Brake Actuator 7500 LBS - DX77FR
- Video: Replacement Inner Member for Dexter DX7.5L Brake Actuator: The Breakdown
- Video: Review of the Replacement Shock Absorber Spring Kit for Dexter Brake Actuators
- Q&A: Replacement Inner Member for UFP A-60 Actuator 34039
- Video: Talking Pre-Greased Trailer Hub and Drum Assemblies with TruRyde
- Video: Review of TruRyde Trailer Hubs and Drums - Trailer Hub And Drum Assembly 3500LB 10 x 2-1/2 - TRU66AV
- Video: Review of Demco Brake Actuator - DA75 Trailer Drum Brake Actuator Black - DM88CV
- Q&A: Replacement Inner Member for UFP A-60 Drum Brake Actuator
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Inner Member for 2004 Nitro Bass Boat Brake Actuator
- Q&A: Which Paint Or Rust-Preventative Coating Is Used On DA75 Demco DM28CV And DM33CV?
- Q&A: What Grease to use with etrailer Pre-Greased Trailer Hub
- Q&A: Tips For Removing Old Inner Member For Dexter A-60 To Replace with New One
Bill H.
3/21/2026
I rebuilt the brake system on my 2006 Shorelander trailer with tandem axle and tandem brakes. The Replacement Inner Member for Dexter DX7.5L Brake Actuator was a critical part of this rebuild and it functions perfectly hauling my 2006 Searay 220. My old actuator was totally rusted and did not work at all.