Detailed Breakdown of the Optronics LED Mini Clearance or Side Marker Trailer Light Video

I'm going to be perfectly honest...the risk is pretty minimal BUT due to the construction differences between bias ply and radial tires the sidewalls do end up flexing differently which could in turn end up with unpredictable ride…

For a typical trailer wiring you will have a brown and green wire for the right-hand side of the trailer and brown and yellow wire for the left side. If this is a new wiring installation and you are installing wiring like part #A35W42B, the brown…

The Curt Pin and Clip #F-4 that you referenced is designed to work on 1-1/4 inch hitches. The reason your hitch has a 1/2 inch hole and a 5/8 inch hole is because it is setup for an obsolete anti-rattle device Draw Tite J-Pin. We no longer carry the…

I sure can! Based on the picture you provided the correct replacement fender for your trailer is going to be the Plastic, Single-Axle Trailer Fender w/ Top and Side Steps - White - 13" to 15" #PF11X35W which will work perfectly with the…

The Mini LED Clearance or Side Marker Trailer Lights like part #MCL85AB for amber are being discontinued by the manufacturer so instead of trying to find the red version and running into this issue again down the road, I recommend replacing them with…

Your Trailer Vin should be able to give you the year it was manufactured. If your Vin is the 17 digit traditional format post early 1980's, then the 10th digit will give you the ending digit of the year it was manufactured. I've attached a…

The problem that some people have with the Fulton F2 jacks such as #F1413040134 is that they are not used to seeing plastic pieces on a trailer jack. If you are rough with a piece of plastic, it can break. But at the same time plastic is not going to…

You will more than likely be just fine replacing your 175/80R13 tires on your boat trailer with ST185/80R13 tires like the Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208 due to them being so close in size. The ST185/80R13 will…

The LED Combination Trailer Tail Light part #STL14RB would be a suitable replacement for the passenger side tail light on a 2019 Bass Tracker Trail Star Trailer. If ever needed, we also have part #STL15RB for the driver side.

Hey Matt, running a ground wire from the junction box to the frame of the trailer won't hurt anything and can only really help. The ground of the box should be running to the ground circuit of the 7-way connector it is attached to. If the lights…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

From the measurements that you gave me the LED Trailer Tail Light with License Plate Bracket #328-003-81LBM1 is exactly what you are needing to upgrade to an LED light. It measures 8-11/16" long x 5-1/2" tall (including license plate…