Demco Base Plate Kit that Fits 2016 Jeep Rubicon Hard Rock Edition

Question

Question:

I want to purchase a base plate for an existing Demco Commander 2. I have a winch, skid plate. Will the base plate work without cutting the skid plate. Vehicle is a 2016 Rubicon Hard Rock

asked by: John P

0

Expert Reply:

Demco has a base plate kit that fits your 2016 Jeep Rubicon Hard Rock with the part # DM56GV which is correct fit with the Demco Commander II part # DM9511012 you have as well.

expert reply by: Jameson C

0

Answer 1

Hey Rick, so the etrailer tow bar part #e34ZR is designed to connect to vehicles that have etrailer brand or Demco brand base plate kits. Since you have a 2012 Jeep Wrangler that would mean you'd want to have the base plate kit part #DM9519292…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Thanks for your question, James. Both the etrailer #e98948 and Demco #DM9519336 base plates will have a very similar, low-profile look once they’re installed, so neither one really stands out more than the other. They’re both custom-fit for your…

view full answer...

Answer 10

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 11

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Answer 12

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Demco Base Plate Kit that Fits 2016 Jeep Rubicon Hard Rock Edition

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching