Can Sway Bracket Jackets for Equal-i-zer be Used With Fastway e2 Hitch

Question

Question:

Will these work with the E2 round bar style hitch set up?

asked by: Mike

0

Expert Reply:

Yes, the round bar Fastway e2 weight distribution hitch is compatible with the Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems # EQ95-01-5150.

expert reply by: Kyle S

0

Andy

5/12/2025

Do the pads come with a smaller bracket opening like 1 3/4” instead of 2”?

Kate F.

5/16/2025

@Andy I only see the ones listed above, I do not see any that are 1 3/4". What brand weight distribution hitch do you have? If it is a brand that we carry, I can get them added to our site.

Answer 1

We have a few options for your coupler with a 4-1/2" lip. The etrailer Trailer Coupler Lock #e98895 is a good lock. From there we move up to the better Trimax Dual Purpose Coupler Lock #TMX67FR which uses a hardened steel construction. The…

view full answer...

Answer 2

The L-pins on the Fastway e2 systems are a little different than those used with the Equal-I-zer system but #EQ95-01-9430 can be used. For the e2 system we also have replacement L-Pin #FA92-03-9205. The clip is #FA92-04-9208. Each of these are sold…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 5

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 6

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 7

Welcome back Don! The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item #EQ37120ET is exactly what I would recommend using. This is a solid reliable system and the built in sway control will make a noticeable improvement in ride…

view full answer...

Can Sway Bracket Jackets for Equal-i-zer be Used With Fastway e2 Hitch

Product Page this Question was Asked From

Continue Researching