Replacement L-Pins for Fastway e2 Weight Distribution Systems
Updated 08/25/2025 | Published 08/09/2016
Products Featured in This Question
Question:
Do the new Equalizer L pins work on the e2 hitch? Also does the Sway Bracket Jackets 95-01-5150 from Progress Mfg, Inc fit on the e2 hitch? Thanks for your help.
asked by: John B
Expert Reply:
The L-pins on the Fastway e2 systems are a little different than those used with the Equal-I-zer system but # EQ95-01-9430 can be used. For the e2 system we also have replacement L-Pin # FA92-03-9205. The clip is # FA92-04-9208. Each of these are sold in quantities of one.
The Equal-I-zer bracket jackets you referred to, part # EQ95-01-5150 will work with your Fastway weight distribution system. However, if you use the bracket jackets, you'll significantly reduce the effectiveness of the sway control feature that the E2 provides. The jackets will prevent the metal on metal friction between the spring bar and the L bracket attached to the trailer frame.
Product Page this Question was Asked From
Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems - 6K to 14k - Qty 2
- Accessories and Parts
- Weight Distribution Hitch
- Pins and Clips
- Equal-i-zer
- Equal-i-zer
more information >
Continue Researching
- Search Results: rm676
- Search Results: nighthawk tow bar
- Search Results: l pin
- Shop: Furrion Variable Speed Chill Cube RV AC w/ Heat Pump - 18K Btu - Ducted - White - R32 - AC Unit Only
- Search Results: facr18heda~bl~am
- Q&A: Do I Need A 4-Bolt To 2-Bolt Adapter For A Dometic 411 Toilet?
- Shop: Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems - 6K to 14k - Qty 2
- Shop: Replacement L-Pin for Equal-i-zer 4,000-lb Weight Distribution Systems
- Shop: Thermostat for Furrion Chill Cube Ducted RV Air Conditioners - Single Zone
- Shop: Mach-C Everest Variable Speed RV Air Conditioner - 18K Btu - Ducted/Non-Ducted - R32 - AC Unit Only
- Shop: Mach-C Everest Variable Speed RV Air Conditioner System - 18K Btu - Ducted/Non-Ducted - R32 - White
- Shop: Replacement L-Pin for Fastway e2 Weight Distribution Systems
- Q&A: Measurements For Equal-i-zer Replacement L-Pin # EQ95-01-9430
- Shop: Mud Flaps
- Search Results: trailer tongue lock
- Video: Review of Bauer Products RV Door Locks - BP-20E Bluetooth Keyless Slam Latch - BA83HR
- Search Results: watchdog
- Search Results: tongue weight
- Q&A: How To Find Gen-Y Pin Box To Gooseneck For a Dutchman Astoria 2993RLF 5TH Wheel Camper
- Video: Safe & Secure with Bauer Products RV Door Latches
- Video: Review of Equal-i-zer Pins and Thumb Clips For Weight Distribution Spring Bars - EQ95-01-9415
- Shop: Gooseneck Hitch
- Shop: Fifth Wheel Hitch
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
- Video: Maintaining Your B&W Companion OEM 5th Wheel Hitch with Slider
- Video: B&W Patriot 5th Wheel Trailer Hitch Head Assembly Replacement Review
- Video: B&W Patriot 5th Wheel Trailer Hitch with Slider Guided Setup - 2024 Ford F-250 Super Duty
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Anti-Rattle Devices
- Q&A: Does Equal-i-zer Weight Distribution Pin Replacement Work with Fastway WD
Bob B.
8/23/2025
I have a Fastway e2 hitch. I need a replacement L-pin, the one I have now is 5/8” square steel bar. The overall outside dimensions are 1 3/4” x 3 1/8” I’m not seeing that size pin based on pictures and descriptions on your site. I would appreciate any help you could give me. Thanks in advance. Bob