Recommended Installation Hardware for the Flexco Manual Pull Out Step
Updated 09/05/2023 | Published 09/02/2023
Products Featured in This Question
Question:
Hi, I have a couple of questions about this step. First, is the actual width of the step 20inch or 21? In the item specs it shows 20inch but in the description it indicates 21. Second, can you tell me the actual bolt pattern dimensions? The specs say the frame is 24 1/4inch wide and 14inch deep but those are the actual dimensions of the mounting frame. Can you give me the actual width and depth between the center of the mounting holes so I can make sure this step will fit my 2001 Rockwood Freedom 2290 pop-up camper? Finally, can you tell me if new mounting hardware/bolts are included, or if those would need to be purchased separately. If separately, can you guide me to the suitable hardware to use?
asked by: Jim M
Expert Reply:
The Flexco Manual Pull-Out Step for RVs # SMFP-1220 measures 21" wide, I double checked with the manufacturer on this as well.
The distance between the center of the mounting holes is 22 1/2" , and since bolts aren't included you can use the Mounting Hardware for Lippert Electric and Manual RV Steps # LC118155-72 for install hardware.
Product Page this Question was Asked From
Flexco Manual Pull-Out Step for RVs - Single - 3" Drop/Rise - 21" Wide - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 20 Inch Wide Step
- 24-1/4 Inch Wide
- 1 Step
- 3 Inch Drop/Rise
- 10-1/2 Inch Entry
- 11 Inch Entry
- 12 Inch Entry
- 13 Inch Entry
- 13-1/2 Inch Entry
- Steel
- Stromberg Carlson
more information >
Continue Researching
- Article: How to Measure for Motorhome Steps
- Q&A: Recommended Single Manual Entry Step for a 2018 Forest River Forester 2291S Motorhome
- Q&A: Can RV Steps be Installed on 2020 Nissan NV2500
- Video: What to Know About the Lippert Manual Pull-Out Step for RVs
- Video: Hands-On with the Flexco Manual Pull-Out Step for RVs
- Video: Flexco Manual Pull-Out Step for RVs Review
- Video: Feature Breakdown: Flexco Manual Pull-Out Step for RVs
- Shop: Lippert Manual Pull-Out Step for RVs - Single - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
- Shop: TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster - 4 Tire Sensors
- Shop: Lippert Outriggers for Manual RV Steps
- Shop: Flexco Manual Pull-Out Step for RVs - Single - 3" Drop/Rise - 21" Wide - 300 lbs
- Shop: Flexco Manual Pull-Out Step for RVs - Single - 3" Drop/Rise - 24" Wide - 300 lbs
- Shop: Flexco Manual Pull-Out Step for RVs - Single - 7" Drop/Rise - 24" Wide - 300 lbs
- Shop: Flexco Manual Pull-Out Step for RVs - Single - 7" Drop/Rise - 20" Wide - 300 lbs
- Shop: Trailer Wiring
- Video: The Low-Down on the 2-Pole Socket Connector
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
on RV Steps
