bing tracking image

Stromberg Carlson RV and Camper Steps - Motorhome - SMFP-1200 Review

content loading

Customers compare SMFP-1200 to these similar products

Products Featured in this Video

Review of Stromberg Carlson Enclosed Trailer Parts SMFP-1200

Today we're going to be taking a look at the Flexco Manual Pullout Step for RVs. This is a manually operated RV step that makes it easier to get into and out of your motor home. Right now it's in a stowed position. When you're ready to use it, all you have to do is go right here to the center of the step, lift up a little bit, pull it out and it's going to extend it into a usable position. When you're ready for travel, tilt it back up, push it in and it's going to go into the locked position. It's got a really nice low profile design, so what that does is it really helps increase ground clearance. It's also going to feature a non-slip surface with these oval tread holes.

It's going to provide sure footing. The tread holes also allow for dirt and moisture to fall through the step so that way it doesn't collect on the step surface. And then here at the front you're going to have the inch and a half wide strip of grip tape on the edge of the step, which is going to offer additional traction. The unit's made from a steel construction. It's going to feature a black powder-coated finish which is going to do a great job of resisting rust and corrosion. It's an easy bolt on or weld on installation.

This is designed to mount to the RV frame in the same manner as your original step. The mount holes right here on each side are going to be elongated. If we take a measurement of those we can see that they're going to measure about 1 inch long and the opening when it comes to the width is going to measure about 3/8 inch wide. That's going to be the same for each mount hole. Mounting hardware is not included.

This product is made right here in the USA. When it comes to the actual dimensions of the step, just measuring the step portion, I'm going to go ahead and fold it out. So, the step itself it's going to measure 24 inches wide and that's going to give us a depth measurement right at 9 inches right there at the center. When it comes to the mounting base, so, basically measuring just edge to edge, we're looking at a measurement of about 28.5 inches. And then the depth of the mounting arm is going to measure 14 inches deep. When it comes to the bolt hold pattern, basically what we're doing is measuring the distance that we have between each hole.

So the ones up front here, center on center, those are going to give us a measurement of about looks to be about 26.75 of an inch. That's going to be the same for the ones here at the rear, center on center, 26.75 of an inch. And then front to back, center on center, those holes are going to give us a separation of about 12 and 3/8 of an inch. When it comes to the drop or rise of the unit when the step is in the usable position, like it is now, from the top of the mounting base to the top of the step platform, we're looking at about 2.75 of an inch. With it in the stowed position, from the top of the mounting base to the top of the step platform, we're looking at about 2.5 inches. This step also has a weight capacity of 350 pounds. That's going to do it for today's look at the Flexco Manual Pullout Step for RVs.

Info for this part was:

Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.