bing tracking image

Stromberg Carlson RV and Camper Steps - Motorhome - SMFP-1120 Review

content loading

Customers compare SMFP-1120 to these similar products




Products Featured in this Video



Review of Stromberg Carlson RV Stairs and Steps SMFP-1120


Today we're going to be taking a look at the Flexco manual pull-out step for RVs. This is a manually operated RV step that makes it easy to get into and out of your RV. All you have to do is pull the step out right here at the center, and that's going to put the step into a usable position, so just pull it out for use, and then when you're ready to travel, pull it up in the center, and allow it to fold back into itself, and it's going to lock into a stored position for safe travel. A few key feature I want to point out about the unit is right here at the front, it's going to have an inch and a half wide strip of grip tape on the edge of the step that's going to offer additional traction, so it has a really nice non-slip surface. It's going to have the oval tread holes, which is going to provide sure footing. Those also allow for dirt and moisture to actually fall through the steps so it doesn't collect on the step surface. The unit's made from a steel construction. It's going to have a black, powder-coated finish on it, so it's very strong and durable, as well as highly resistant to rusting corrosion.

It's an easy bolt-on or weld-on installation. The unit's going to mount to the RV frame in the same way as your original step. The part's made right here in the USA. Here at the top, you can see that it has 2 mount holes located on each side. I just want to go over a few measurements real quick, starting with the actual dimensions of the step, so if we take a look at the width, we can see that that step is going to give us a width of right around 20 inches. Taking a measurement of the depth, that's going to give us a depth of 8 inches.

Now, when it comes to the mounting base, measuring it from outer edge to outer edge, that's going to measure 21 inches wide. The mounting base is also going to give us a depth measurement of 6 inches deep, and then the distance that we have between the mount holes going across, that's going to give us a measurement of 19 and one quarter inches, and then the depth in between those holes, we're looking at 4 and a half inches. Your hardware's not included. Again, you can easily bolt this on, or it can be welded to the RV frame. Now, when it comes to the drop of the unit, measuring from the top of the mounting base to the top of the step, that's going to give us a measurement of 7 and a half inches, and this step also features a weight capacity of 350 pounds. See the side profile here, really nice design, and again, it's made from steel, and it's made right here in the USA, and it has that really nice black powder-coated finish on it. That's going to do it for today's look at the Flexco manual pull-out step for Rvs.


Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.