Gooseneck Hitch Recommendation for 2018 Ford F-550 Cab and Chassis

Question

Question:

Looking for a gooseneck hitch for 2018 f550 flatbed.

asked by: Eric F

0

Expert Reply:

We don't have anything that's custom fit but you could use the Curt goooseneck hitch part # C65500 and have it welded to the truck frame.

expert reply by: Jameson C

0

Answer 1

The Curt Flat Plate Gooseneck #C65500 is a multi-fit application that can be used on a cab and chassis truck. Typically, the plate would be placed on top of the flat bed over the rear axle. The Universal Rail Kit, part #C61502 can be used to provide…

view full answer...

Answer 2

Hello Tyler, thanks for reaching out. I do have an option for you, but there is no custom fit gooseneck hitch made for the 1985 Ford F-350 Cab and Chassis with the 34" frame. The best option for this will be the Buyers Products Gooseneck Hitch…

view full answer...

Answer 3

Hey James, the only option for a gooseneck hitch on a cab and chassis like your F-550 would be custom fabrication. The B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1500 is designed for this type of application so that's what…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Gooseneck Hitch Recommendation for 2018 Ford F-550 Cab and Chassis

Product Page this Question was Asked From

Continue Researching