What Size Wrench or Socket is Needed for the Replacement Hardware for Curt E16 5th Wheel Hitch

Question

Question:

What size socket do you need for these bolts?

asked by: Andrew

0

Expert Reply:

The Replacement Hardware # C16115-SK8 for the Curt E16 5th Wheel Trailer Hitch # C16115 are M14, 2x45mm bolts. Which means you will need a 21mm wrench or socket.

expert reply by: Scott S

0

Answer 1

Hello Alex, Thanks for attaching the pictures! I am sorry, but the only replacement hardware we have is the Replacement Head Mounting Hardware for Curt 5th Wheel Slider Hitches #C35UR, but they do not have sleeves. I attached an image of where the…

view full answer...

Answer 2

The correct bolts to connect the head of your Curt A20 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package #C84FR to the its legs are the: -Replacement Hardware for Curt 5th Wheel Hitches #C35U5. This kit includes 4 each of the needed bolts,…

view full answer...

Answer 3

The correct leg kit to fit the E16 head part #C16515 that you referenced is the part #C16903 as the head part #C16920 that you referenced only fits the A16 hitches.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

What Size Wrench or Socket is Needed for the Replacement Hardware for Curt E16 5th Wheel Hitch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching