Install Picture of Draw Tite Hitch on 2023 Toyota RAV4

Question

Question:

Do you have any installation photos? How does the bent portion affect the position of the hitch?

asked by: D L

0

Expert Reply:

If you check out the attached install instruction link on this page for the Draw Tite hitch part # DT82QR you can see several pictures of it installed. I attached a single picture to this page that shows it installed for you to check out. The bend in the brackets does not affect the install of the hitch at all.

expert reply by: Jameson C

0

Install Pic
(click to enlarge)

Answer 1

Hey Jeff, the Curt hitch part #C77MJ and the TowSmart part #TS42VR are both really great hitches. They are similar enough in design that I wouldn't say one or the other is more hidden. Now if you wanted something totally hidden we have the Oris…

view full answer...

Answer 2

Hey Corey, I finally got my hands on both the Curt #C33NR and Draw-Tite #DT82QR and was able to measure from the mounting holes down to the bottom of the receiver tube to see which had more ground clearance. The Draw-Tite #DT82QR had a 12.5"…

view full answer...

Answer 3

I recommend the Class III Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit part #DT82QR for your 2020 Toyota RAV4 which is a concealed cross tube design. The hitch will not be completely hidden once installed though. You will see the receiver…

view full answer...

Answer 4

As someone who has a motorcycle carrier that I use at the back of an SUV I would say you are on the right track. You will need to basically find a mid-level size SUV or bigger like a Chevy Tahoe (what I have) so that you have the hitch capacity and…

view full answer...

Answer 5

Hey Aniki, the B and W hitch part #BW47BR has the same ground clearance dimension as the Curt #C77MJ, 12 inches. Are you worried about dragging?

view full answer...

Answer 6

The Curt Hitch #C13416, the Draw Tite part #DT82QR, and the EcoHitch #EH97FR all fit the Plug In hybrid versions of the 2021 Toyota RAV4 Prime that you mentioned. They all put the hitch opening as close to the lower fascia as possible so none of them…

view full answer...

Answer 7

Hello David, Congrats on the new RAV4!! What is your new favorite feature? The Curt hitch #C66KR will not work for your car because it is the Plug-in Hybrid, you had 2025 Toyota RAV4 put in the fit guide, but you have the PHEV (Plug-in Hybrid…

view full answer...

Answer 8

Hello Daniel, Congrats on the new ride! What is your new favorite feature? We do have a hitch that will work for you, but there is not a hidden hitch for your 2025 Lexus NX 450h Plus at this time. We do have the Curt Trailer Hitch Receiver - Custom…

view full answer...

Answer 9

There's not much of a difference in the 2" hitches available for the 2023 Toyota RAV4. The Draw-Tite item #DT82QR, Curt item #C13416, and etrailer item #e23ZR all look identical when installed. With this in mind, I recommend going with the…

view full answer...

Answer 10

Hello Mark, thanks for reaching out. For your 2025 Toyota RAV4 Hybrid I recommend the TowSmart Class 3 Hitch #TS42VR. This has a 2" receiver and a 600 lb tongue weight capacity so this will work great with your Benton bike rack. The video below…

view full answer...

Answer 11

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit part #DT82QR for the 2020 Toyota RAV4 to carry the bike rack because it does provide about a 1/2" more ground clearance compared to the other options. I do not see you…

view full answer...

Answer 12

If you are looking at the Curt Hitch #C66KR and the Draw-Tite Hitch #36675, both of these 1-1/4 inch hitches have ground clearances of 12 inches. Ground clearance is measured from the ground to the bottom of the upper part of the receiver tube…

view full answer...

Install Picture of Draw Tite Hitch on 2023 Toyota RAV4

Continue Researching