Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When it’s time to haul serious weight, this tire-and-wheel combo is ready. The Kenda 6.90/6.00-9 bias tire carries up to 1,298 lbs at 60 psi, backed by a 6-ply construction that’s made for stability and control under load. The matched steel wheel is rated for 1,120 lbs and meets Department of Transportation specs, so you can trust it to handle real-world towing demands.
The bias-ply build uses thick nylon cords set at a 30- to 45-degree angle in alternating layers, giving the sidewalls more stiffness and letting the tire flex evenly. The result is a stable, comfortable ride that stays composed when you’re moving across rough or uneven terrain.
Moisture, grime, and salt are no match for this wheel’s corrosion-resistant finish. A tough white powder coat is layered over an e-coat primer to keep the steel protected trip after trip. It stays looking clean while guarding against rust in all kinds of wet or humid conditions.
This tire-and-wheel assembly arrives matched and built to DOT standards, so it’s ready for service right out of the box. The tire comes with a 5-year warranty plus a 1-year worry-free guarantee that covers replacement if it’s damaged in the first year—extra peace of mind for anyone putting in long miles or heavy use.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Kenda 6.90 by 6 by 9 bias trailer tire in a load range C, and it's mounted on this nine inch white solid center steel wheel with the four-on-four inch bolt pattern. Now, this is a bias trailer tire by Kenda. It's great for off-road and agricultural use, provide superior stability, and it'll reduce rolling resistance for a nice smooth ride. The wheel it's mounted on, you can see, is a solid center steel wheel, resist rust and corrosion, uses a white powder coat finish over an e-coat primer. Now, this tire wheel assembly does need the DOT Department of Transportation specifications.
A few measurements on this, starting with the wheel, the diameter of the wheel, which is measured inside to inside, is nine inches. The width on just the wheel is four inches wide. The wheel has a bolt pattern of four-on-four inches. And if you wanna measure that on a wheel that's an even number of lugs, in this case four, it's pretty easy because if you notice, the lug holes are directly across from each other. So to measure the bolt pattern, just measure from the center of one hole to the center of the hole right across from it.
So on this, it will measure four inches, so it's a four-on-four inch bolt pattern. Does use a wheel lug size of a half inch by 20. The pilot hole diameter, which is the large hole here in the center of the wheel, is 2-1/2 inches. Weight capacity on just the wheel is 1,120 pounds. Now, we mentioned the tire size, which will be stamped on the sidewall, and you can see it's 6.90 by 6 by 9.
It has a section width of 6-1/2 inches. Overall diameter on this when it's inflated is 21.1 inches. And this tire is a load range C, which means it's a six ply rated tire. Has a maximum load capacity of 1,298 pounds at 60 PSI. And the last thing is the speed rating on this tire is 62 miles per hour.
But that's gonna do it for the review on the Kenda 6.90 by 6 by 9 bias trailer tire in a loading C on the nine inch white solid center steel wheel with the four-on-four inch bolt pattern.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Christopher H.
8/4/2026
Glad these worked well for you Andrew and thanks for including the photo!
James D.
7/16/2026
Looks good John, glad to know we've been able to provide that top notch experience. We appreciate you choosing etrailer!
Jerry B.
8/17/2026
I'm glad we got you taken care of! Any big plans with the trailer now?
Heather A.
5/8/2026
That’s great to hear, and sounds like you made a solid call going up a size. It’s always nice when the only tradeoff is just shifting your straps a bit and everything else works even better than before. Really appreciate you sharing that too, especially managing multiple trailers. That kind of real world experience helps a lot of folks feel more confident when they’re deciding what direction to go. What kind of trailer is the new wheel on? Any fun plans?
Kate F.
6/25/2026
They look great Scott! Thanks for including the picture. What an awesome boat too, what year is that? What body of water do you mainly get out on? I bass fish a lot out here in Missouri at the Lake of the Ozarks and Mark Twain Lake. I dabble in some local tournaments but I contribute more than I win =)
Gwendolyn Y.
4/9/2026
They look great, Kristopher!
Michael
10/13/2026
The tires and wheels are working well, no problems
Michael
10/13/2026
Great, no problem
Nick S.
11/3/2025
Each week I feel like I see a new way products are used, and this is a first for me! That is super cool, I am glad you were able to get them working for your application to get that barn made. It is good to know just some spacers and it was able to work. What was the intention behind the barn, animals, hay?
Nick S.
11/4/2025
Christopher H.
9/3/2026
They look great Peter and thanks for adding the photo!
Kate F.
11/19/2025
Glad we had the right fit to keep you rolling to the water! MMMMM Yummy Crappie!! We are located in Wentzville, MO but you can find me most weekends on the Lake of the Ozarks or Mark Twain Lake, I dabble in local bass tournaments, but greatly appreciate the crappie hole at the end of our dock! Thanks for sharing your catches with us, tight lines =)
Condition: Installed
Notes: Item has been previously test fitted and has very minor install marks. 1Z7586X39098203674
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Patrick
1/6/2026
Still working great after a year