Folding Step Stool # PT36NJ Top Step Height

Question

Question:

What is the height of the top step open?

asked by: Mr. C

1

Helpful Expert Reply:

The top step of the Folding Step Stool # PT36NJ that you referenced is 17-1/2 inches tall.

expert reply by: Jameson C

1

Answer 1

Hey Mark! The Folding Step Stool #PT36NJ weighs 9 lbs. It has a polystyrene construction and can hold up to 300 lbs. What will you be using the step stool for?

view full answer...

Answer 2

Hey Lon, yes the Air Lift LoadLifter part #AL49DQ would be a great option for your 2023 Toyota Tacoma TRD. IT will give you the support you are wanting but since you can easily adjust air pressure you'd also be able to easily tailor the…

view full answer...

Answer 3

The Titan Chain Alloy Snow Tire Chains - Diamond Pattern - Square Link - 1 Pair #TC2524 are a great choice for your vehicle. According to your owners manual, you should only put the tire chains on the rear tires.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Folding Step Stool # PT36NJ Top Step Height

Product Page this Question was Asked From

Continue Researching