Replacement Trailer 4/7-Way Connector For the Factory Connector On a 2017 Chevy Silverado 1500

Question

Question:

Is item # C42JR a direct replacement for a 2017 chevy 1500 factory connection?

asked by: Jerry A

1

Helpful Expert Reply:

Yes, the Curt # C42JR will fit in place of the factory Pollak # HM40975 trailer connector on your 2017 Chevrolet Silverado 1500.

expert reply by: Bud M

1

Answer 1

Yes it will Damon. The Curt Replacement OEM USCAR Trailer Connector item #C42JR will plug into the harness right behind your factory connector. It's a circular called a USCAR. Are you wanting to use the 7-way and 4-way at the same time?

view full answer...

Answer 2

Yes, it will! However, the Curt Replacement OEM USCAR Trailer Connector item #C42JR won't let you use both the 7-Way and the 4-Way at the same time. You will need to install the Multi-Tow 7-Way and 4-Way item #30955 to use both at the same time.…

view full answer...

Answer 3

Yes, you can use the #HM11141144 to replace the wiring harness and connector on your 2017 Silverado 1500. You will have to cut off the old connector and splice in the new one to make this work.

view full answer...

Answer 4

To replace the 7-way trailer connector on your 2019 Chevy Silverado 2500 I recommend the Reese Multi-Plug Wiring Harness for Factory Tow Package - 7-Way and 4-Way Flat Trailer Connectors #74682 for a connection near the hitch. If you want to replace…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Trailer 4/7-Way Connector For the Factory Connector On a 2017 Chevy Silverado 1500

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching