Bearing Kit Replacement For Lippert 4,400 lb Axle

Question

Question:

I need a bearing kit for a Lippert 4400lbs axle. The axle number is LCI44-SBA-86-68.5-NOSP-US-L-655-7278-18PT. Thanks

asked by: Zachary C

1

Helpful Expert Reply:

Lippert's 4,400 lb axles use the same bearings as 3,500 lb axles so the correct replacement bearing kit is the following:

- Bearing Kit # BK2-100

If you are looking for grease as well, I recommend Bearing Grease # L11380, and for a bearing packer I recommend the Bearing Packer # PTW1218.

expert reply by: Kyle S

1

Answer 1

For a Lippert 4,400 lb trailer axle the correct bearing kit is the part #BK2-100 which includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter pin and a tang washer.

view full answer...

Answer 2

Hey Ryan, the reason the Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers #K71-358-00 that you referenced only comes with 4 bushings is because the bushings only install in the leaf springs. The additional wet bolts of this kit that…

view full answer...

Answer 3

Hey Chris, thanks for reaching out. We can definitely provide a wet bolt/HD shackle kit for your 2023 Grand Design Imagine AIM 15BH. For that I recommend the following: - Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers -3-1/8"…

view full answer...

Answer 4

Hey Rick, welcome back. If you don't want to use the bolts included with the Correct Track Trailer Alignment and Lift Kit item #RR23QX or item #RR55QX, you can replace them with the 3-3/8" Replacement Wet Shoulder Bolt item #MR52HR. Using…

view full answer...

Answer 5

Great question, Brian! The bushings that fit on the bolts for the shackle straps tend to wear out a bit faster than the ones that connect your leaf spring directly to a hanger which is why there are only 4 bushings in the Dexter Heavy Duty Suspension…

view full answer...

Answer 6

The #30-20 hanger is a unique hanger as it comes with it's own bushing that has an inner diameter of 9/16 inches and installs in a different orientation than most. Like Victoria said, the reason most standard style hangers do not come with…

view full answer...

Answer 7

For a heavy duty shackle kit that would work well on your 4,400 lb axles we have the Dexter HD shackle kit part #K71-358-00. These shackles are really thick at 1/2 inches.

view full answer...

Answer 8

Hey Derek, I looked up your trailer and it looks like its a single axle trailer. We have a kit from Dexter with new wet bolts, bushings and upgraded shackle straps for single axle trailers. #K71-358-00 is a great kit for your trailer. The bushings…

view full answer...

Answer 9

For a Lippert 4,400 lbs axle you will need the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles item #BK2-100. The kits for the 3,500 lbs axles fit the 4,400 lbs ones too so hope this clears up the confusion. You will need one kit per hub.

view full answer...

Answer 10

The Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part #BK2-100 or just the Grease Seal part #RG06-050.

view full answer...

Answer 11

Hey Gerald, this is a great question but basically the Lippert 4,400 lb axle just uses the same bearings as the 3,500 lb axles. The bearings themselves aren't actually rated for weight and instead we just organize them based on what axle…

view full answer...

Answer 12

The hubs used by the Dexter 4400 lb axle are 3500 lb hubs that have had their weight capacity upgraded by using a LM67048 outer wheel bearing. A 4400 hub like the #8-407-5UC3-EZ would use the same #58846 grease seal as a 3500 lb hub would. Long story…

view full answer...

Bearing Kit Replacement For Lippert 4,400 lb Axle

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching