How to Know if 2018 Nissan Pathfinder Has Factory Tow Package

Question

Question:

I have a 2018 Nissan Pathfinder sv AWD. How do I determine if I have a factory tow package for wiring harnesses. Thank you

asked by: David W

0

Expert Reply:

All the 2018 Nissan Pathfinders have the factory tow package, but it just needs to be activated. To do that you just need to add the fuses that come with the correct wiring harness, which is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56281.

expert reply by: Kyle S

0

Answer 1

Hey Daniel thanks for all the questions! One of them is going to be pretty easy but also disappointing, every hitch for your 2019 Toyota Sienna is going to require the panel to be removed, trimmed, then reinstalled. This is actually not as hard to do…

view full answer...

Answer 2

Based on my research it looks like the factory towing package for the 2018 Toyota Sienna consists of an engine oil cooler along with a heavy-duty radiator and fan. The factory towing package is standard for the XLE model like what you have. With the…

view full answer...

Answer 3

Thanks for your question, Erald. The converter box pretty much dumbs down the Jeeps wiring when towing a trailer. Wiring on a trailer is pretty basic compared to how the wiring is on a newer vehicle. The best route to have both would be to get Curt…

view full answer...

Answer 4

All 2020 Nissan Pathfinders come from the factory prewired for a brake controller and a 7-way trailer connector, though it might lack the 7-way and the relays needed to activate the tow package. You will need a brake controller. If your vehicle…

view full answer...

Answer 5

The bolts to install a hitch on a 2017 Nissan Pathfinder are M12-1.25 x 30mm. You can order the correct hitch mounting hardware kit for your hitch with part number #RHK. When you navigate to that part's page, you'll simply put the model…

view full answer...

Answer 6

If your existing 4 pole utilizes the jumper harness and relays shown in the provided photo, you could simply use part #118282 which provides the actual 7-way and the pigtail needed to install it into the tow package wiring at the rear of the truck.…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Hey Dave, congrats on your new Jeep! I checked what the "B" prep group is because I am not familiar and it looks like it already comes with a trailer hitch. Or at least that's what makes the most sense since the "B" prep group…

view full answer...

Answer 9

For trailer wiring for your 2017 Nissan Pathfinder I would recommend the custom fit Curt kit part #C56281 as it installs much easier than the Hopkins by utilizing factory trailer wiring already present on the vehicle whereas the Hopkins kit requires…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

How to Know if 2018 Nissan Pathfinder Has Factory Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching