Spindles and Hubs To Update 1972 Sanger Boat Trailer To Currently Used Sized Bearings
Updated 07/24/2023 | Published 07/21/2023
Products Featured in This Question
Question:
I’m looking to purchase 4 wheel bearing kits for a 1972 Sanger Boat trailer: Inside Bearing: I.D: 1.33" O.D. 2.12" Depth .65" Seal : 2.35 O.D 1.72 I.D. Outer Bearing: I.D. .82" O.D 1.59" Depth .65" These are the old Timken numbers I have: Inner: 168149 PT2814 Outer: LM12749097 or LM1Z749097 , the numbers are really faded. Thank you
asked by: Walt R
Expert Reply:
You are going to want to update the spindles on your 1972 Sanger boat trailer to the more common Spindle # TRU74FR. This will give you the current common bearing sizes for a typical 3,500lb axle as we do not carry either of your bearing sizes. You will need to pair the new spindles with new hubs. We have either an Idler Hub # AKIHUB-545-35-EZ-K or Hub/Drum # AKHD-545-35-G-EZ-K which comes complete with bearings. These both have the 5 on 4-1/2" bolt pattern. If your trailer has a different bolt pattern please let me know and I can help you find the best hubs for your application.
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L68149
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Shop: Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel - 5 on 4-1/2 - LR D
- Q&A: Determining the Correct Leaf Spring Length for Trailer
- Q&A: Do Hangers Need to be Welded to Install
- Q&A: Troubleshooting Broken Leaf Spring On a Boat Trailer With Tandem Axles Mounted Individually
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: 175 80 13
- Search Results: trailer hubs and drums
- Search Results: 2k axle
- Search Results: jack support plate
- Search Results: fender
- Search Results: trailer axles
- Search Results: am31990
- Q&A: Replacement Timbren Axle-Less Trailer Suspension For a 3500LB Jet Boat Trailer
- Q&A: What is Difference Between 3,000 and 3,500 lb Trailer Brake Assembly
- Q&A: Availability Of An Overslung 86.5" Hub Face Axle Beam
- Q&A: Should I Put Brakes on the Front or Back Axle of my Tandem Axle Trailer
- Video: Comprehensive Review: Bottom Support Plate for 2-1/4" OD A-Frame Jacks