Availability Of An Overslung 86.5" Hub Face Axle Beam
Published 02/14/2024
Products Featured in This Question
Question:
I’m needing to replace a Dexter axle on my RV. Dexter # is 120091, HF 86.5, SC 68.5 overslung configured Serial number 134145207. I need only the bare axle with spindles. No brakes or hubs. Can you supply this axle? Thanks
asked by: John S
Expert Reply:
Hey John we do have a potential axle option for you. We have axles with the 86.5" hub face, such as the Trailer Axle Beam # e33GR, which is rated for 6,000. This axle has spring seats at 71-1/2", and they are underslung. We are not able to weld on spring seats for you here, but we can sell you a few loose spring seats # TRSS300. You would just have to have them welded to the top of the axle tube in your desired location.
This axle is also available in a 5,200 lb capacity # e45GR if that is your preference.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Blind Spot Detection
- Search Results: e73sr
- Search Results: st225/75/r15
- Shop: Goodyear Endurance ST225/75R15 Trailer Tire with Silver Modular Wheel - 6 on 5-1/2
- Shop: Aluminum Liger Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Glossy Black
- Search Results: trailer axles
- Q&A: Do Hangers Need to be Welded to Install
- Q&A: Troubleshooting Broken Leaf Spring On a Boat Trailer With Tandem Axles Mounted Individually
- Q&A: Determining the Correct Leaf Spring Length for Trailer
- Q&A: Will a Dexter Trailer Hub Fit on a Lippert Trailer Axle
- Search Results: fender
- Search Results: 175 80 13
- Search Results: 2k axle
- Search Results: jack support plate
- Q&A: 86 Inch Axle With Hub and Electric Brakes For Enclosed Trailer
- Q&A: Replacement 6K Axle Recommendation for a 2018 Coachmen Camper
- Q&A: Replacement Axle for Lippert 5200 that is 86.5 inches Long
- Shop: Suspension Enhancement
- Video: Comprehensive Review: Bottom Support Plate for 2-1/4" OD A-Frame Jacks
- Video: TruRyde Trailer Suspension TRSS300 Review
- Video: The Low-Down on the Dexter Trailer Axle Beam with E-Z Lube Spindles
- Video: Trailer Axle Beam with Easy Grease Spindles Feature Review
- Video: Trailer Axle with Idler Hubs Spec Review
- Shop: RV Camera