What Kind Of Wiring Harness Is Included With The Stealth Hitch 391TES317T

Question

Question:

I purchased a towing kit for my tesla model 3 expecting the part# tk35vr to be included since it was the same price as some of the universal kits and it was explicitly listed as the reccomended wiring harness kit for the model 3. Why did my kit ship with the cut your new car wiring harness to shreds hoping you dont ruin somethinginch style of harness when its stated clearly in several places its the wrong type?

asked by: Daniel

0

Expert Reply:

The kit that you ordered # 391TES317T comes with the stealth hitch towing kit # 391CONVB7. This is a hardwire kit just as shown and stated on the part page. The wiring kit is made specifically for the Tesla Model 3 2017-2023 so it will work nicely for your vehicle.

The Tekonsha TK35VR that you mentioned is not included with what you ordered as it is a separate part from a different manufacturer. That said the TK35VR is on extended backorder and not available at this time. All of the other wiring harnesses we offer will require cutting and splicing of the vehicles wiring.

expert reply by: Jesse M

0

Answer 1

Hi Yves, There likely was a change between those model years that prevents the Curt hitch from fitting, but it could just also be that Curt hasn't been able to physically test the fit yet on that year and model. We unfortunately haven't…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

What Kind Of Wiring Harness Is Included With The Stealth Hitch 391TES317T

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching