Replacement Motor For Kwikee Steps on 2020 Thor ACE Motorhome

Question

Question:

Hello, Looking for a replacement step motor for 2020 Thor Ace, sticker on motor indicates 214-1009 Straight Binch LCI PN: 713488. Do you have this or can you recommend a replacement? Thanks for your help

asked by: Charles S

0

Expert Reply:

Thank you for providing that information. What you need is the Replacement Motor for Kwikee Electric RV Steps # LC379147. This will replace the motor you have now and get your steps up and running again.

expert reply by: Robin H

0

Answer 1

Hey Doug, According to my research you're going to need the Replacement Kwikee Electric Motor Assembly with 14NM IMGL RV Steps #LC75JX. This doesn't come with any cables/sensors, but if you let me know what you're needing, I'd be more…

view full answer...

Answer 2

We do offer a replacement hardware kit for trailer hitches. What you will need is part #RHK. Under the box that says Shipping Special, type in the hitch number, in this case 24704. The under that, choose the hitch manufacturer from the pull down…

view full answer...

Answer 3

The Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup #FR32PV will replace your current Coleman MACH ac. It includes the necessary wiring and hardware to secure in place of the rooftop unit. This is necessary otherwise it would not…

view full answer...

Answer 4

The Replacement Hydraulic Pump Motor for Lippert Hydraulic Power Unit #LC167576 you referenced is for a different style pump and would not be a compatible replacement. The LC57AF is the correct replacement for your 414850 model pump motor. To order…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 11

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 12

Hey Lucian! There are definitely a lot of options out there, and the best is usually a mix of parts from different manufacturers. We don't have a package under a single part number but I can give you a list of parts for a complete setup. I…

view full answer...

Replacement Motor For Kwikee Steps on 2020 Thor ACE Motorhome

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching