Replacement Hub/Drum and Brakes For a UFP 10" Hub/Drum Stamped HD 1377 On EZ Loader Boat Trailer
Updated 07/06/2023 | Published 07/05/2023
Products Featured in This Question
Question:
Hi- I have a an ez-loader boat trailer rated at 3000lb capacity. It has hyd surge brakes, would like to replace both hub assemblies complete. 10 UFP Brand, HD 1377, 08, 0804 is on the hub. Please advise on parts to replace, the complete hub and just brake pads, springs, etc Thanks
asked by: Jeff T
Expert Reply:
Based on previous information we have for your 10" UFP HD 1377 hub it uses the following components. I do recommend pulling one of your hubs to verify that the replacements listed below match your current parts.
Inner Bearing # L68149 (Inner diameter 1.378")
Inner Race # L68111 (Outer diameter 2.361")
Outer Bearing # L44649 (Inner diameter 1.063")
Outer Race # L44610 (Outer diameter 1.980")
Grease Seal # 10-42 (Inner diameter 1.75", Outer diameter 2.33")
If the inner diameters match you will be able to use the Hub/Drum Assembly # AKHD-545-35-G-K
If the numbers or dimensions do not match what you currently have, please let me know what dimensions you have and I will locate the correct parts for you.
For your brakes I can only recommend replacing the entire Assemblies # AKFBBRK-35-D as we do not carry the replacement parts for the original brakes you have from EZ-Loader.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Parts Needed to Add Brakes to Pontoon Trailer With 3,500 lb Axles
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Axle for AL-KO T35 3,500 Pound Axle with 85 Inch Hub Length
- Q&A: Replacement Trailer Hub and Brake Assemblies for AL-KO 8500 Hub/Drum
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Do Self Adjusting Trailer Brake Assemblies Need to be Initially Adjusted
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Recommended Braking Hub w/ a 5 on 4-1/2 Lug Pattern and Brake Assemblies for a Lippert 3,500 lb Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Parts Needed To Add Electric Drum Brakes To Boat Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Raise Your Travel Trailer Height
- Article: Testing Trailer Brake Magnets for Proper Function