Replacement Hub for a UFP 13674
Updated 09/26/2025 | Published 04/19/2025 >
Question:
I have a 2010 Yacht Club 1825BG boat trailer and I am trying to replace the entire hub assembly. My original hubs are UFP 13674. Would these be the replacement for the original?
asked by: Dan
Expert Reply:
It might be Dan but I wasn't able to pull any specific information off of the UFP 13674 part number you gave me. What you'll need to do is pull one of the hubs and read the part numbers stamped into the sides of the bearings. This information will tell me what size your spindle is.
The next thing I need to know is your lug nut pattern so you don't have to replace your wheels. I have linked a faq article below that will show you how to measure them.
If you could get this information around for me and leave it in the comment box below, I'll be happy to confirm item # AKIHUB-545-35-G-EZ-K will work for your boat trailer or find you a hub that will.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer hitch
- Search Results: shocker gooseneck
- Search Results: trailer tires and wheels
- Search Results: ball mount
- Shop: Shocker Max Black Air 2-Ball Mount for 2" Hitch - 4-1/2" Drop - 14K
- Search Results: race l68110 trailer bearings races seals caps
- Search Results: shocker hitch gooseneck coupler
- Search Results: trailer jack
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway
- Shop: Replacement 3/32" Safety Cable for Demco Brake Actuators - Qty 1
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Steel Trailer Wheel - 8" x 5-3/8" Rim - 4 on 4 - Offset 0 - White
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Q&A: How to Find Replacement Bearings for UFP Trailer Hub 13674
- Video: Breaking Down the Kodiak Trailer Hub for 3,500-lb Axles
- Video: Stealth Hitches Manufacturer Breakdown
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2020 Mazda CX-5
- Video: All You Need to Know About the Double Lip Seal for 3,700-lb Marine Hubs
- Video: Installing the Dexter Double Lip Seal for 3,700-lb Marine Hubs
- Video: Feature Breakdown: 7-Way Round RV Style Trailer Connector
- Shop: Lift Assist
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-545-35-EZ-K
- Q&A: Axle Replacement For Tracker Trailstar Trailer
- Q&A: When Installing Hubs On An Axle Should They Spin Freely Or Should There Be Some Resistance?
- Q&A: What is Normal Temperature Rating for Trailer Hubs
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Nerf Bars - Running Boards



Jerred H.
9/26/2025
Hey, did you have a chance to check the part numbers on your hub bearings and measure your lug nut pattern? I'm eager to help confirm if the hub assembly you purchased is the right fit for your boat trailer.